Skip to the content
12

S110FA

onsemiExtended

-55℃~+150℃ 100V 1A 30A 50uA@100V 800mV@1A Independent SOD-123FA Schottky Diodes ROHS

Part id
onsemi/S110FA
Category
Schottky Diodes
Package
SOD-123FA
Pins
2
In stock
193 at JLCPCB (C556397)
Used on
2 open-source boards

Overview

The S110FA is a schottky Diode made by onsemi in a SOD-123FA package with 2 pins. -55℃~+150℃ 100V 1A 30A 50uA@100V 800mV@1A Independent SOD-123FA Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123F, from KiCad's library), ready for a KiCad board. 193 are in stock at JLCPCB (part C556397). 2 open-source boards in 1 repository on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123FFrom KiCad's library

From the datasheet

6
Reverse voltage, most
100 V · max repetitive peak reverse voltage · p. 3
Forward current, most
1 A · max average forward rectified current · p. 3
Forward voltage
700 mV · max instantaneous forward voltage at IF = 0.5 A · p. 3
Forward voltage
800 mV · max instantaneous forward voltage at IF = 1.0 A · p. 3
Junction, hottest
150 °C · max operating junction temperature · p. 3
Junction to air (SOD-123FA)
152 K/W · junction-to-ambient; JESD51-3 FR-4 test board · p. 3

What it is and has

6
Efficiency
Low power loss, high efficiency · p. 2
Protection
Guard ring for overvoltage protection · p. 2
Flammability
UL 94V-0 · p. 2
Moisture sensitivity
MSL 1 per J-STD-020 · p. 2
Compliance
RoHS compliant / green molding compound · p. 2
Qualification
Industrial device qualified per AEC-Q101 · p. 2

Specifications

15
ParameterConditionsAs printedPage
Repetitive Peak Reverse Voltage VRRMS110FA; TA = 25°Cmax 100 V3
RMS Reverse Voltage VRMSS110FA; TA = 25°Cmax 70 V3
DC Blocking Voltage VRS110FA; TA = 25°Cmax 100 V3
Average Forward Rectified Current IF(AV)TA = 25°Cmax 1 A3
Peak Forward Surge Current IFSM8.3 ms Single Half Sine-Wave Superimposed on Rated Load; TA = 25°Cmax 30 A3
Operating Junction Temperature Range TJmin -55 · max 150 C3
Storage Temperature Range TSTGmin -55 · max 150 C3
Thermal Characteristics, Junction-to-Lead JLTA = 25°C; JESD51-3 Recommended Thermal Test Board; FR-4 PCB, 76.2mm x 114.3mmmax 16 C/W3
Thermal Resistance, Junction-to-Ambient RJATA = 25°C; JESD51-3 Recommended Thermal Test Board; FR-4 PCB, 76.2mm x 114.3mmmax 152 C/W3
Maximum Instantaneous Forward Voltage(2) VFS110FA; IF = 0.5 A; TA = 25°C; pulse test with PW = 300 us, 1% duty cyclemax 0.7 V3
Maximum Instantaneous Forward Voltage(2) VFS110FA; IF = 1.0 A; TA = 25°C; pulse test with PW = 300 us, 1% duty cyclemax 0.8 V3
Maximum Reverse Current at Rated VR IRS110FA; TJ = 25°C; at rated VRmax 0.05 mA3
Maximum Reverse Current at Rated VR IRS110FA; TJ = 125°C; at rated VRmax 0.5 mA3
Typical Junction Capacitance CJS110FA; VR = 4 V, f = 1 MHz; TA = 25°Ctyp 35 pF3
Typical Reverse Recovery Time TrrS110FA; IF = 0.5 A, IR = 1 A, IRR = 0.25 A; TA = 25°Ctyp 8.3 ns3

Pins, by the datasheet

2
1 Cathode
Cathode. · p. 2
2 Anode
Anode. · p. 2

Ordering codes, by the datasheet

1
S110FA
SOD-123FA · Top mark 10L; Tape and Reel · p. 2

Open-source boards using it

2
  • 4 layers116.5 × 98 mmHw v1, the printed circuit board in 3D

    Hw v1

    Churrosoft/uEFI-v6.x

    Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC

    248 parts2
  • 4 layers80.6 × 93.7 mmHw v1, the printed circuit board in 3D

    Hw v1

    Churrosoft/uEFI-v6.x

    Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC

    183 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the S110FA?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-123F, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the S110FA?

SOD-123FA, with 2 pins. Its footprint is drawn on this page.

Where is the S110FA datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the S110FA?

JLCPCB lists it as part C556397, with 193 in stock; the sellers' links on this page open their listings.

What can replace the S110FA?

Parts like it in the library: the DSK120 by hongjiacheng, the DSK210 by hongjiacheng, the DSK310 by hongjiacheng and the DSS210 by BORN. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the S110FA?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.