RMPA5251
onsemiExtended
-40℃~+85℃ 10dB 140mA 16dB 26dBm 27dB 3V~3.6V 4.9GHz~5.85GHz Low-power mode、Built-in power detector、Linearization design、Bias control circuit LCC-16(3x3) RF Amplifiers ROHS
- Part id
- onsemi/RMPA5251
- Category
- RF Amplifiers
- Package
- LCC-16(3x3)
- Pins
- 17
- In stock
- 0 at JLCPCB (C3191203)
Overview
The RMPA5251 is a RF Amplifier made by onsemi in a LCC-16(3x3) package with 17 pins. -40℃~+85℃ 10dB 140mA 16dB 26dBm 27dB 3V~3.6V 4.9GHz~5.85GHz Low-power mode、Built-in power detector、Linearization design、Bias control circuit LCC-16(3x3) RF Amplifiers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:RMPA5251, from EasyEDA) and its footprint (EasyEDA_Cloud:MLF-16_L3.0-W3.0-P0.50-TL-EP1.6, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3191203).
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | N/C | Unspecified |
| 2 | VM1 | Unspecified |
| 3 | VC1 | Unspecified |
| 4 | RFIN | Unspecified |
| 5 | N/C | Unspecified |
| 6 | N/C | Unspecified |
| 7 | VM3 | Unspecified |
| 8 | N/C | Unspecified |
| 9 | N/C | Unspecified |
| 10 | RFOUT | Unspecified |
| 11 | DT1(Vdet) | Unspecified |
| 12 | DT2 | Unspecified |
| 13 | VC3 | Unspecified |
| 14 | VC2 | Unspecified |
| 15 | VM2 | Unspecified |
| 16 | P1(Logic) | Unspecified |
| 17 | GND | Unspecified |
Questions
Is there a KiCad symbol and footprint for the RMPA5251?
Yes. The symbol is EasyEDA_Cloud:RMPA5251 and the footprint EasyEDA_Cloud:MLF-16_L3.0-W3.0-P0.50-TL-EP1.6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the RMPA5251?
LCC-16(3x3), with 17 pins. Its footprint is drawn on this page.
Where is the RMPA5251 datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the RMPA5251?
JLCPCB lists it as part C3191203, with 0 in stock; the sellers' links on this page open their listings.