Skip to the content
123

NUD3124L

onsemiExtended

-40℃~+125℃ 1 1.4Ω 200mA SOT-23 Relay / Coil Drivers ROHS

Part id
onsemi/NUD3124L
Category
Brushed DC Motor Drivers
Package
SOT-23
Pins
3
In stock
0 at JLCPCB (C85758)
Used on
8 open-source boards

Overview

The NUD3124L is a brushed DC Motor Driver made by onsemi in a SOT-23 package with 3 pins. -40℃~+125℃ 1 1.4Ω 200mA SOT-23 Relay / Coil Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PMV450ENEA215, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C85758). 8 open-source boards in 7 repositories on GitHub use it.

Symbol

D3G1S2
EasyEDA_Cloud:PMV450ENEA215From EasyEDA

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the NUD3124L
PinNameType
1GUnspecified
2SUnspecified
3DUnspecified

Open-source boards using it

8
  • 4 layers99.9 × 100 mmHermeslite, the printed circuit board in 3D

    Hermeslite

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    490 parts384
  • 2 layers65 × 56 mmRPi Hat Thermocouple, the printed circuit board in 3D

    RPi Hat Thermocouple

    mikelawrence/RPi-Hat-Thermocouple

    Raspberry Pi Thermocouple Hat

    46 parts9MIT
  • 2 layers65 × 30 mmRPi pHat Thermocouple, the printed circuit board in 3D

    RPi pHat Thermocouple

    mikelawrence/RPi-pHat-Thermocouple

    Raspberry Pi Thermocouple pHat

    59 parts7MIT
  • 2 layers65 × 56 mmRadioberry preamp, the printed circuit board in 3D

    Radioberry preamp

    OE9SAU/SAUBerry9

    SDR TRX from Radioberry

    142 parts4
  • 2 layers110.5 × 104.1 mmPjc kicad, the printed circuit board in 3D

    Pjc kicad

    jdeguire/pjcontroller

    Hardware and software for controlling your homebuilt video-beaming creation.

    89 partsGPL-3.0
  • 2 layers100 × 100 mmWordClock, the printed circuit board in 3D

    WordClock

    lamothek/WordClockPCB

    87 parts
  • 2 layers65 × 56 mmHat, the printed circuit board in 3D

    Hat

    pa3gsb/Radioberry-2.x

    Ham Radio hat for Raspberry PI

    87 parts678
  • 2 layers75.4 × 89 mmRx tx bpf board, the printed circuit board in 3D

    Rx tx bpf board

    OE9SAU/SAUBerry9

    SDR TRX from Radioberry

    37 parts4

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the NUD3124L?

Yes. The symbol is EasyEDA_Cloud:PMV450ENEA215 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NUD3124L?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the NUD3124L datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NUD3124L?

JLCPCB lists it as part C85758, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NUD3124L?

Parts like it in the library: the NUD3105LT1G by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NUD3124L?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.