Skip to the content
123

NTR1P02

onsemiExtended

-55℃~+150℃ 1 P-Channel 110pF 165pF 1A 2.3V 2.5nC@5V 20V 280mΩ@4.5V 35pF 400mW P-Channel SOT-23 MOSFETs ROHS

Part id
onsemi/NTR1P02
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
13,783 at JLCPCB (C129192)

Overview

The NTR1P02 is a MOSFET made by onsemi in a SOT-23 package with 3 pins. -55℃~+150℃ 1 P-Channel 110pF 165pF 1A 2.3V 2.5nC@5V 20V 280mΩ@4.5V 35pF 400mW P-Channel SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 13,783 are in stock at JLCPCB (part C129192).

Symbol

Pinmap_Generic:Q_PMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

9
Drain-source, most
20 V · VDSS, absolute maximum · p. 1
Gate-source, most
20 V · VGS, continuous absolute maximum magnitude, ±20 V · p. 1
Drain current, most
1 A · ID, continuous maximum at TA = 25°C · p. 1
Junction, hottest
150 °C · TJ, absolute maximum · p. 1
Junction to air (SOT−23)
300 K/W · Junction−to−Ambient · p. 1
Gate threshold
1.9 V · VGS(th), typical at VDS = VGS, ID = −250 mA · p. 2
On resistance
148 mΩ · Typical, VGS = −10 V, ID = −1.5 A · p. 2
On resistance
235 mΩ · Typical, VGS = −4.5 V, ID = −0.75 A · p. 2
Edge
3 ns · Fall time, typical at VDD = −15 V, ID = −1 A, VGS = −5 V, RG = 2.5 W · p. 2

What it is and has

2
Package
SOT−23 surface mount · p. 1
Compliance
Pb−Free and RoHS compliant · p. 1

Specifications

34
ParameterConditionsAs printedPage
Drain−to−Source Voltage VDSSmax -20 V1
Gate−to−Source Voltage − Continuous VGS±20 Vmin -20 · max 20 V1
Drain Current − Continuous @ TA = 25°C IDTA = 25°Cmax -1 A1
− Pulsed Drain Current (tp ≤ 1 ms) IDMtp ≤ 1 msmax -2.67 A1
Total Power Dissipation @ TA = 25°C PDTA = 25°Cmax 400 mW1
Operating and Storage Temperature Range TJ, TstgLower endpoint; upper endpoint is printed on the following linemin -55 °C1
Operating and Storage Temperature Range TJ, TstgUpper endpoint, continuation linemax 150 °C1
Thermal Resistance; Junction−to−Ambient RqJASOT−23max 300 °C/W1
Maximum Lead Temperature for Soldering Purposes TL1/8″ from case for 10 smax 260 °C1
Drain−to−Source Breakdown Voltage V(BR)DSSVGS = 0 V, ID = −10 mAmin -20 V2
Drain−to−Source Breakdown Voltage V(BR)DSSPositive Temperature Coefficienttyp 32 mV/°C2
Zero Gate Voltage Drain Current IDSSVDS = −20 V, VGS = 0 V, TJ = 25°Cmax -1 mA2
Zero Gate Voltage Drain Current IDSSVDS = −20 V, VGS = 0 V, TJ = 150°Cmax -10 mA2
Gate−Body Leakage Current IGSSVGS = ±20 V, VDS = 0 V; ±100 nA limitmax 100 nA2
Gate Threshold Voltage VGS(th)VDS = VGS, ID = −250 mA; Note 1min -1.1 · typ -1.9 · max -2.3 V2
Gate Threshold Voltage VGS(th)Negative Temperature Coefficienttyp -4 mV/°C2
Static Drain−to−Source On−State Resistance RDS(on)VGS = −10 V, ID = −1.5 A; Note 1typ 0.148 · max 0.18 W2
Static Drain−to−Source On−State Resistance RDS(on)VGS = −4.5 V, ID = −0.75 A; Note 1typ 0.235 · max 0.28 W2
Input Capacitance CissVDS = −5 V, VGS = 0 V, f = 1.0 MHztyp 165 pF2
Output Capacitance CossVDS = −5 V, VGS = 0 V, f = 1.0 MHztyp 110 pF2
Reverse Transfer Capacitance CrssVDS = −5 V, VGS = 0 V, f = 1.0 MHztyp 35 pF2
Turn−On Delay Time td(on)VDD = −15 V, ID = −1 A, VGS = −5 V, RG = 2.5 W; Note 2typ 7 ns2
Rise Time trVDD = −15 V, ID = −1 A, VGS = −5 V, RG = 2.5 W; Note 2typ 9 ns2
Turn−Off Delay Time td(off)VDD = −15 V, ID = −1 A, VGS = −5 V, RG = 2.5 W; Note 2typ 9 ns2
Fall Time tfVDD = −15 V, ID = −1 A, VGS = −5 V, RG = 2.5 W; Note 2typ 3 ns2
Total Gate Charge QtotVDS = −15 V, VGS = −5 V, ID = −0.8 Atyp 2.5 nC2
Gate−Source Charge QgsVDS = −15 V, VGS = −5 V, ID = −0.8 Atyp 0.75 nC2
Gate−Drain Charge QgdVDS = −15 V, VGS = −5 V, ID = −0.8 Atyp 1 nC2
Diode Forward On−Voltage (Note 2) VSDIS = −0.6 A, VGS = 0 V; Note 1typ -0.8 · max -1 V2
Diode Forward On−Voltage (Note 2) VSDIS = −0.6 A, VGS = 0 V, TJ = 150°C; Note 1typ -0.6 V2
Reverse Recovery Time trrIS = −1 A, dIS/dt = 100 A/ms, VGS = 0 V; Note 1typ 13.5 ns2
Reverse Recovery Time taIS = −1 A, dIS/dt = 100 A/ms, VGS = 0 V; Note 1typ 10.5 ns2
Reverse Recovery Time tbIS = −1 A, dIS/dt = 100 A/ms, VGS = 0 V; Note 1typ 3 ns2
Reverse Recovery Stored Charge QRRIS = −1 A, dIS/dt = 100 A/ms, VGS = 0 V; Note 1typ 0.008 mC2

Pins, by the datasheet

3
1 Gate
Gate. · p. 1
2 Source
Source. · p. 1
3 Drain
Drain. · p. 1

Ordering codes, by the datasheet

2
NTR1P02T1G
SOT−23 (Pb−Free) · 3000 / Tape & Reel · p. 1
NTR1P02T3G
SOT−23 (Pb−Free) · 10000 / Tape & Reel · p. 1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NTR1P02?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NTR1P02?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the NTR1P02 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NTR1P02?

JLCPCB lists it as part C129192, with 13,783 in stock; the sellers' links on this page open their listings.

What can replace the NTR1P02?

Parts like it in the library: the AO3400 by GOODWORK, the AP2300 by ALLPOWER, the SI2302-2.3A-JSM by JSMSEMI and the AO3400A by Alpha & Omega Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.