Skip to the content
1234

NTMFS5C628NL

onsemiExtended

-55℃~+175℃ 1 N-channel 1.7nF 110W 150A 28pF 2V 3.3mΩ@4.5V 3.6nF 52nC@10V 60V N-Channel SO-8FL MOSFETs ROHS

Part id
onsemi/NTMFS5C628NL
Category
MOSFETs
Package
SO-8FL
Pins
5
In stock
4,016 at JLCPCB (C145537)
Used on
2 open-source boards

Overview

The NTMFS5C628NL is a MOSFET made by onsemi in a SO-8FL package with 5 pins. -55℃~+175℃ 1 N-channel 1.7nF 110W 150A 28pF 2V 3.3mΩ@4.5V 3.6nF 52nC@10V 60V N-Channel SO-8FL MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1S_2S_3S_4G_5D, from PCBKit's generic symbols) and its footprint (EasyEDA_Pro:dfn-5_l4.9-w5.9-p1.27-ls6.2-bl, from EasyEDA Pro), ready for a KiCad board. 4,016 are in stock at JLCPCB (part C145537). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1S_2S_3S_4G_5DFrom PCBKit's generic symbols

Footprint

1234
EasyEDA_Pro:dfn-5_l4.9-w5.9-p1.27-ls6.2-blFrom EasyEDA Pro

From the datasheet

10
Drain-source, most
60 V · Drain-to-source voltage, absolute max · p. 1
Gate-source, most
20 V · Gate-to-source voltage, absolute max ±20 V · p. 1
Drain current, most
150 A · Continuous drain current, max at TC = 25°C · p. 1
Junction, hottest
175 °C · Operating junction temperature, max · p. 1
Junction to case (DFN5)
1.3 K/W · Junction-to-case, steady state max · p. 1
Junction to air (DFN5)
40 K/W · Junction-to-ambient, steady state max; FR4, 650 mm2, 2 oz. Cu pad · p. 1
Gate threshold
2 V · Gate threshold voltage, max; VGS = VDS, ID = 135 mA · p. 2
On resistance
2.4 mΩ · Drain-to-source on resistance, max; VGS = 10 V, ID = 50 A · p. 2
On resistance
3.3 mΩ · Drain-to-source on resistance, max; VGS = 4.5 V, ID = 50 A · p. 2
Edge
70 ns · Fall time, typical; VGS = 4.5 V, VDS = 30 V, ID = 50 A, RG = 2.5 W · p. 2

What it is and has

4
Footprint
5x6 mm · p. 1
On resistance
Low RDS(on) to minimize conduction losses · p. 1
Gate charge and capacitance
Low QG and capacitance to minimize driver losses · p. 1
Compliance
Pb−Free and RoHS compliant · p. 1

Specifications

47
ParameterConditionsAs printedPage
Drain−to−Source Voltage VDSSmax 60 V1
Gate−to−Source Voltage VGS±20 Vmin -20 · max 20 V1
Continuous Drain Current RqJC (Notes 1, 3) IDSteady State; TC = 25°Cmax 150 A1
Continuous Drain Current RqJC (Notes 1, 3) IDSteady State; TC = 100°Cmax 110 A1
Power Dissipation RqJC (Note 1) PDSteady State; TC = 25°Cmax 110 W1
Power Dissipation RqJC (Note 1) PDSteady State; TC = 100°Cmax 56 W1
Continuous Drain Current RqJA (Notes 1, 2, 3) IDSteady State; TA = 25°Cmax 28 A1
Continuous Drain Current RqJA (Notes 1, 2, 3) IDSteady State; TA = 100°Cmax 20 A1
Power Dissipation RqJA (Notes 1 & 2) PDSteady State; TA = 25°Cmax 3.7 W1
Power Dissipation RqJA (Notes 1 & 2) PDSteady State; TA = 100°Cmax 1.9 W1
Pulsed Drain Current IDMTA = 25°C, tp = 10 msmax 900 A1
Operating Junction and Storage Temperature TJ, TstgLower limitmin -55 °C1
Operating Junction and Storage Temperature TJ, TstgUpper limitmax 175 °C1
Source Current (Body Diode) ISmax 120 A1
Single Pulse Drain−to−Source Avalanche Energy EASIL(pk) = 9 Amax 565 mJ1
Lead Temperature for Soldering Purposes TL1/8″ from case for 10 smax 260 °C1
Junction−to−Case − Steady State RqJCDFN5 (SO−8FL)max 1.3 °C/W1
Junction−to−Ambient − Steady State (Note 2) RqJADFN5 (SO−8FL); surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu padmax 40 °C/W1
Drain−to−Source Breakdown Voltage V(BR)DSSVGS = 0 V, ID = 250 mAmin 60 V2
Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJtyp 26 mV/°C2
Zero Gate Voltage Drain Current IDSSVGS = 0 V, VDS = 60 V, TJ = 25 °Cmax 10 mA2
Zero Gate Voltage Drain Current IDSSVGS = 0 V, VDS = 60 V, TJ = 125°Cmax 250 mA2
Gate−to−Source Leakage Current IGSSVDS = 0 V, VGS = 20 Vmax 100 nA2
Gate Threshold Voltage VGS(TH)VGS = VDS, ID = 135 mA; Note 4min 1.2 · max 2 V2
Threshold Temperature Coefficient VGS(TH)/TJNote 4typ -5 mV/°C2
Drain−to−Source On Resistance RDS(on)VGS = 10 V, ID = 50 A; Note 4typ 2 · max 2.4 mW2
Drain−to−Source On Resistance RDS(on)VGS = 4.5 V, ID = 50 A; Note 4typ 2.6 · max 3.3 mW2
Forward Transconductance gFSVDS = 15 V, ID = 50 A; Note 4typ 110 S2
Input Capacitance CISSVGS = 0 V, f = 1 MHz, VDS = 25 Vtyp 3600 pF2
Output Capacitance COSSVGS = 0 V, f = 1 MHz, VDS = 25 Vtyp 1700 pF2
Reverse Transfer Capacitance CRSSVGS = 0 V, f = 1 MHz, VDS = 25 Vtyp 28 pF2
Total Gate Charge QG(TOT)VGS = 4.5 V, VDS = 48 V; ID = 50 Atyp 24 nC2
Total Gate Charge QG(TOT)VGS = 10 V, VDS = 48 V; ID = 50 Atyp 52 nC2
Threshold Gate Charge QG(TH)VGS = 4.5 V, VDS = 48 V; ID = 50 Atyp 6 nC2
Gate−to−Source Charge QGSVGS = 4.5 V, VDS = 48 V; ID = 50 Atyp 12 nC2
Gate−to−Drain Charge QGDVGS = 4.5 V, VDS = 48 V; ID = 50 Atyp 4.5 nC2
Plateau Voltage VGPVGS = 4.5 V, VDS = 48 V; ID = 50 Atyp 3 V2
Turn−On Delay Time td(ON)VGS = 4.5 V, VDS = 30 V, ID = 50 A, RG = 2.5 W; Note 5typ 15 ns2
Rise Time trVGS = 4.5 V, VDS = 30 V, ID = 50 A, RG = 2.5 W; Note 5typ 150 ns2
Turn−Off Delay Time td(OFF)VGS = 4.5 V, VDS = 30 V, ID = 50 A, RG = 2.5 W; Note 5typ 28 ns2
Fall Time tfVGS = 4.5 V, VDS = 30 V, ID = 50 A, RG = 2.5 W; Note 5typ 70 ns2
Forward Diode Voltage VSDVGS = 0 V, IS = 50 A, TJ = 25°Ctyp 0.8 · max 1.2 V2
Forward Diode Voltage VSDVGS = 0 V, IS = 50 A, TJ = 125°Ctyp 0.75 V2
Reverse Recovery Time tRRVGS = 0 V, dIs/dt = 100 A/ms, IS = 50 Atyp 55 ns2
Charge Time taVGS = 0 V, dIs/dt = 100 A/ms, IS = 50 Atyp 28 ns2
Discharge Time tbVGS = 0 V, dIs/dt = 100 A/ms, IS = 50 Atyp 28 ns2
Reverse Recovery Charge QRRVGS = 0 V, dIs/dt = 100 A/ms, IS = 50 Atyp 60 nC2

Pins, by the datasheet

5
1 SOURCE
Source. · p. 6
2 SOURCE
Source. · p. 6
3 SOURCE
Source. · p. 6
4 GATE
Gate. · p. 6
5 DRAIN
Drain; exposed pad. · p. 6

Ordering codes, by the datasheet

2
NTMFS5C628NLT1G
DFN5 (Pb−Free) · 1500 / Tape & Reel · p. 5
NTMFS5C628NLT3G
DFN5 (Pb−Free) · 5000 / Tape & Reel · p. 5

Open-source boards using it

2

Questions

Is there a KiCad symbol and footprint for the NTMFS5C628NL?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1S_2S_3S_4G_5D and the footprint EasyEDA_Pro:dfn-5_l4.9-w5.9-p1.27-ls6.2-bl, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NTMFS5C628NL?

SO-8FL, with 5 pins. Its footprint is drawn on this page.

Where is the NTMFS5C628NL datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NTMFS5C628NL?

JLCPCB lists it as part C145537, with 4,016 in stock; the sellers' links on this page open their listings.

Which open-source boards use the NTMFS5C628NL?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.