Skip to the content

NCV300LSN28

onsemiExtended

-40℃~+125℃@(TA) 1 2.8V 500nA 900mV~4.9V Active Low Push-pull Voltage Detector TSOP-5-1.5mm Supervisor and Reset ICs ROHS

Part id
onsemi/NCV300LSN28
Category
Monitors & Reset Circuits
Package
TSOP-5-1.5mm
Pins
5
In stock
104 at JLCPCB (C892914)

Overview

The NCV300LSN28 is a monitors & Reset Circuit made by onsemi in a TSOP-5-1.5mm package with 5 pins. -40℃~+125℃@(TA) 1 2.8V 500nA 900mV~4.9V Active Low Push-pull Voltage Detector TSOP-5-1.5mm Supervisor and Reset ICs ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:TSOP-5_L3.0-W1.5-P0.95-BL, from EasyEDA), ready for a KiCad board. 104 are in stock at JLCPCB (part C892914).

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCV300LSN28?

Yes. the footprint EasyEDA_Cloud:TSOP-5_L3.0-W1.5-P0.95-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCV300LSN28?

TSOP-5-1.5mm, with 5 pins. Its footprint is drawn on this page.

Where is the NCV300LSN28 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCV300LSN28?

JLCPCB lists it as part C892914, with 104 in stock; the sellers' links on this page open their listings.

What can replace the NCV300LSN28?

Parts like it in the library: the NCV303LSN10 by onsemi, the NCV303LSN29 by onsemi, the NCV301LSN22 by onsemi and the NCP300HSN09 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.