NCP802SAN5
onsemiExtended
-40℃~+85℃ 1 1.5V~5V 2.3V 3uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support - Battery Management ROHS
- Part id
- onsemi/NCP802SAN5
- Category
- Supervisor And Reset ICs
- Pins
- 5
- In stock
- 0 at JLCPCB (C3685180)
Overview
The NCP802SAN5 is a supervisor And Reset IC made by onsemi with 6 pins. -40℃~+85℃ 1 1.5V~5V 2.3V 3uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support - Battery Management ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCP802SAN5T1G, from EasyEDA) and its footprint (EasyEDA_Cloud:SON-6_L2.3-W1.6-P0.50-LS2.6-BR, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3685180).
Symbol
Footprint
Pinout
6| Pin | Name | Type |
|---|---|---|
| 1 | DO | Unspecified |
| 2 | Vcell | Unspecified |
| 3 | GND | Unspecified |
| 4 | DS | Unspecified |
| 5 | CO | Unspecified |
| 6 | P- | Unspecified |
Questions
Is there a KiCad symbol and footprint for the NCP802SAN5?
Yes. The symbol is EasyEDA_Cloud:NCP802SAN5T1G and the footprint EasyEDA_Cloud:SON-6_L2.3-W1.6-P0.50-LS2.6-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the NCP802SAN5 datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the NCP802SAN5?
JLCPCB lists it as part C3685180, with 0 in stock; the sellers' links on this page open their listings.