Skip to the content

NCP302HSN18

onsemiExtended

-40℃~+125℃@(Ta) 1 800mV~10V Active Low Voltage monitor TSOP-5-1.5mm Supervisor and Reset ICs ROHS

Part id
onsemi/NCP302HSN18
Category
Monitors & Reset Circuits
Package
TSOP-5-1.5mm
Pins
5
In stock
0 at JLCPCB (C892335)

Overview

The NCP302HSN18 is a monitors & Reset Circuit made by onsemi in a TSOP-5-1.5mm package with 5 pins. -40℃~+125℃@(Ta) 1 800mV~10V Active Low Voltage monitor TSOP-5-1.5mm Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCP303LSN20T1G, from EasyEDA) and its footprint (EasyEDA_Cloud:TSOP-5_L3.0-W1.5-P0.95-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C892335).

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP302HSN18?

Yes. The symbol is EasyEDA_Cloud:NCP303LSN20T1G and the footprint EasyEDA_Cloud:TSOP-5_L3.0-W1.5-P0.95-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP302HSN18?

TSOP-5-1.5mm, with 5 pins. Its footprint is drawn on this page.

Where is the NCP302HSN18 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP302HSN18?

JLCPCB lists it as part C892335, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCP302HSN18?

Parts like it in the library: the NCV303LSN10 by onsemi, the NCV303LSN29 by onsemi, the NCV301LSN22 by onsemi and the NCP300HSN09 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.