NCP1852FCC
onsemiExtended
-40℃~+85℃ 1 1.8A 3V~7.3V 500uA Charging IC I2C Lithium Battery Not supported Support - Battery Management ROHS
- Part id
- onsemi/NCP1852FCC
- Category
- Supervisor And Reset ICs
- Pins
- 5
- In stock
- 0 at JLCPCB (C3687306)
Overview
The NCP1852FCC is a supervisor And Reset IC made by onsemi with 25 pins. -40℃~+85℃ 1 1.8A 3V~7.3V 500uA Charging IC I2C Lithium Battery Not supported Support - Battery Management ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCP1852FCCT1G, from EasyEDA) and its footprint (EasyEDA_Cloud:FLIPCHIP-25_L2.6-W2.2-R5-C5-P0.40-TL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3687306).
Symbol
Footprint
Pinout
25| Pin | Name | Type |
|---|---|---|
| A1 | IN | Unspecified |
| A2 | IN | Unspecified |
| A3 | SPM | Unspecified |
| A4 | SDA | Unspecified |
| A5 | SCL | Unspecified |
| B1 | CAP | Unspecified |
| B2 | CAP | Unspecified |
| B3 | OTG | Unspecified |
| B4 | ILIM2 | Unspecified |
| B5 | FLAG | Unspecified |
| C1 | SW | Unspecified |
| C2 | SW | Unspecified |
| C3 | AGND | Unspecified |
| C4 | ILIM1 | Unspecified |
| C5 | NTC | Unspecified |
| D1 | PGND | Unspecified |
| D2 | PGND | Unspecified |
| D3 | SENSP | Unspecified |
| D4 | SENSN | Unspecified |
| D5 | FET | Unspecified |
| E1 | CBOOT | Unspecified |
| E2 | TRANS | Unspecified |
| E3 | CORE | Unspecified |
| E4 | WEAK | Unspecified |
| E5 | BAT | Unspecified |
Questions
Is there a KiCad symbol and footprint for the NCP1852FCC?
Yes. The symbol is EasyEDA_Cloud:NCP1852FCCT1G and the footprint EasyEDA_Cloud:FLIPCHIP-25_L2.6-W2.2-R5-C5-P0.40-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the NCP1852FCC datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the NCP1852FCC?
JLCPCB lists it as part C3687306, with 0 in stock; the sellers' links on this page open their listings.