Skip to the content
12345678

NCP1653AP

onsemiExtended

-40℃~+125℃ 3.7mA 67kHz 8.75V~18V CCM PFCController Soft-start、Overvoltage Protection、Under-voltage lockout、Over temperature protection、Undervoltage Protection、Tracking boost function PDIP-8 PFC Controllers ROHS

Part id
onsemi/NCP1653AP
Category
AC DC Controllers And Regulators
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C897158)

Overview

The NCP1653AP is an AC DC Controllers And Regulator made by onsemi in a PDIP-8 package with 8 pins. -40℃~+125℃ 3.7mA 67kHz 8.75V~18V CCM PFCController Soft-start、Overvoltage Protection、Under-voltage lockout、Over temperature protection、Undervoltage Protection、Tracking boost function PDIP-8 PFC Controllers ROHS.

PCBKit's library has its KiCad symbol (Regulator_Controller:NCP1653, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C897158).

Symbol

1FB/SD2VCONTROL3IN4CS5VM6GND7DRV8VCC
Regulator_Controller:NCP1653From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the NCP1653AP
PinNameType
1FB/SDInput
2VCONTROLPassive
3INInput
4CSInput
5VMPassive
6GNDPower in
7DRVOutput
8VCCPower in

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP1653AP?

Yes. The symbol is Regulator_Controller:NCP1653 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP1653AP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the NCP1653AP datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP1653AP?

JLCPCB lists it as part C897158, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCP1653AP?

Parts like it in the library: the UC3843BN by STMicroelectronics, the VIPER22A by Minos, the UC3845BN by STMicroelectronics and the VIPER12ADIP-E by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.