Skip to the content
1234

NCP1117LPST33

onsemiExtended

0℃~+125℃ 1 1.3V@(1A) 18V 1A 3.3V 550uA 60dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
onsemi/NCP1117LPST33
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223
Pins
4
In stock
9,197 at JLCPCB (C146799)
Used on
1 open-source board

Overview

The NCP1117LPST33 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by onsemi in a SOT-223 package with 4 pins. 0℃~+125℃ 1 1.3V@(1A) 18V 1A 3.3V 550uA 60dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AMS1117-1.8RG, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board. 9,197 are in stock at JLCPCB (part C146799). 1 open-source board in 1 repository on GitHub use it.

Symbol

1ADJ/GND2VOUT3VIN4EP
EasyEDA_Cloud:AMS1117-1.8RGFrom EasyEDA

Footprint

1234
Package_TO_SOT_SMD:SOT-223From KiCad's library

From the datasheet

9
Supply, absolute maximum
18 V · Vin, absolute maximum · p. 2
Works from
0 °C · TA, minimum operating ambient temperature · p. 2
Works up to
125 °C · TA, maximum operating ambient temperature · p. 2
Junction, hottest
150 °C · TJ(max), absolute maximum junction temperature · p. 2
Takes working
550 mA · Vin, typical quiescent current at Vin = 12 V, Io = 10 mA · p. 3
Gives
1 A · rated continuous output current · p. 10
Current limit
1.1 A · minimum current limit at Vin = 7 V, TA = 25°C · p. 3
Output
3.3 V · typical fixed output at TJ = 25°C, Io = 10 mA · p. 3
Dropout
1.3 V · typical dropout at Iout = 1 A, TA = 25°C · p. 3

What it is and has

6
Protection
Current limit and thermal shutdown · p. 1
Minimum load
No minimum load requirement for fixed voltage output devices · p. 1
Package options
SOT−223 and DPAK · p. 1
Lead finish
Pb−Free · p. 1
Protection
Output current limiting · p. 1
Protection
Built-in thermal shutdown · p. 1

Around it

2
cap 10 mF
between Vin and GND; Ceramic or tantalum input bypass capacitor; mount directly across input and ground with the shortest possible track length. May be required when the device is more than a few inches from the power source. · p. 10
cap 10 mF
between Vout and GND; Minimum output capacitance specified by the pin table; 20 mW ≤ ESR ≤ 20 W. · p. 2

Specifications

20
ParameterConditionsAs printedPage
DC Input Voltage Vinmin -0.3 · max 18 V2
Operating Junction Temperature Range TOPmin 0 · max 125 °C2
Operating Ambient Temperature Range TAmin 0 · max 125 °C2
Maximum Junction Temperature Range TJ(max)min -55 · max 150 °C2
Thermal Resistance, Junction−to−Ambient (Note 2) RqJA100 x 100 mm PCB, Cu thickness 1 oz; TA = 25°Cmax 108 °C/W2
Thermal Resistance, Junction−to−Case RqJCmax 15 °C/W2
Electrostatic Discharge ESDHuman Body Modelmax 2000 V2
Electrostatic Discharge ESDMachine Modelmax 200 V2
Storage Temperature Range TSTGmin -65 · max 150 °C2
Output Voltage, Fixed Output Devices VoutNCP1117−3.3; TJ = 25°C; 4.8 V ≤ Vin ≤ 12 V, Io = 10 mAmin 3.235 · typ 3.3 · max 3.365 V3
Line Regulation, Adjustable & Fixed (Note 3) ReglineNCP1117−XXX; TJ = 25°C; Vout + 1.5 V < Vin < 12 V, Io = 10 mAmax 0.2 %3
Load Regulation (Note 3) RegloadNCP1117−3.3; TJ = 25°C; 10 mA < Io < 1 A, Vin = 4.7 Vtyp 26 · max 33 mV3
Dropout Voltage (Vin – Vout), Adjustable & FixedNCP1117−XXX; Iout = 1 A, TA = 25°C; DVout = Vout − 100 mVtyp 1.3 · max 1.4 V3
Current Limit, Adjustable & Fixed IoutNCP1117−XXX; Vin = 7 V, TA = 25°Cmin 1.1 A3
Minimum Load Current (Note 4) ILminNCP1117−XXX; 0°C ≤ Tj ≤ 125°Ctyp 1 · max 5 mA3
Quiescent Current IQFIXNCP1117−fixed; Vin = 12 V; Io = 10 mAtyp 550 · max 700 mA3
Thermal Regulation (Note 5)TA = 25°C, T = 30 ms pulsetyp 0.008 · max 0.04 %W3
Ripple Rejection RRNCP1117−XXX; F = 120 Hz, Cout = 25 mF tantalum; Iout = 1 A, Vin = Vout + 3 Vtyp 60 dB3
Thermal Shutdown TshdnNCP1117−XXXtyp 165 °C3
Thermal Hysteresis ThystNCP1117−XXXtyp 10 °C3

Pins, by the datasheet

3
1 Adj (GND)
Ground for fixed-mode devices. · p. 2
2 Vout
Regulator output; connect a minimum 10 mF capacitor to ground with 20 mW ≤ ESR ≤ 20 W for stability. · p. 2
3 Vin
Regulator input; typically connect a storage capacitor to ground, and maintain input 1.3 V typically above Vout. · p. 2

Ordering codes, by the datasheet

1
NCP1117LPST33T3G
SOT−223 · 3.3 V fixed output; Pb−Free; 4000 / Tape & Reel · p. 12

Open-source boards using it

1
  • 2 layers240 × 194 mmInfinitas, the printed circuit board in 3D

    Infinitas

    freeDSP/freeDSP-INFINITAS

    USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.

    1,020 parts35

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP1117LPST33?

Yes. The symbol is EasyEDA_Cloud:AMS1117-1.8RG and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP1117LPST33?

SOT-223, with 4 pins. Its footprint is drawn on this page.

Where is the NCP1117LPST33 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP1117LPST33?

JLCPCB lists it as part C146799, with 9,197 in stock; the sellers' links on this page open their listings.

What can replace the NCP1117LPST33?

Parts like it in the library: the NCP1117ST33 by onsemi, the AZ1117H-3.3TRE1 by Diodes Incorporated, the LD1117AG-33-AA3-A-R by UTC and the AZ1117CH-3.3TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP1117LPST33?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.