Skip to the content
12345678910111213141516

NCP1095DBR2

onsemiExtended

-40℃~+125℃@(TJ) 1 100V 90W IEEE 802.3 at(PoE+)、IEEE 802.3 bt(PoE++)、IEEE 802.3 af(PoE) Overheat protection、Overcurrent Protection Powered Device (PD) TSSOP-16 Power Over Ethernet (PoE) Controllers ROHS

Part id
onsemi/NCP1095DBR2
Category
Power Over Ethernet (PoE) Controllers
Package
TSSOP-16
Pins
16
In stock
70 at JLCPCB (C904377)

Overview

The NCP1095DBR2 is a power Over Ethernet (PoE) Controller made by onsemi in a TSSOP-16 package with 16 pins. -40℃~+125℃@(TJ) 1 100V 90W IEEE 802.3 at(PoE+)、IEEE 802.3 bt(PoE++)、IEEE 802.3 af(PoE) Overheat protection、Overcurrent Protection Powered Device (PD) TSSOP-16 Power Over Ethernet (PoE) Controllers ROHS.

PCBKit's library has its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 70 are in stock at JLCPCB (part C904377).

Symbol

The library has no symbol for this part yet.

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP1095DBR2?

Yes. the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP1095DBR2?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the NCP1095DBR2 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP1095DBR2?

JLCPCB lists it as part C904377, with 70 in stock; the sellers' links on this page open their listings.

What can replace the NCP1095DBR2?

Parts like it in the library: the LM5071MTX-50 by Texas Instruments, the LM5071MTX-80 by Texas Instruments, the LM5070MTCX-50 by Texas Instruments and the LM5070MTC-50 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.