
4x power opamp
antonloof/4x_power_opamp
Four power amplifiers used for driving large ish loads from pwm ouputs
onsemiExtended
-65℃~+150℃ 1 PNP 10uA 150V 20 30MHz 500mV 50W 5V 8A PNP TO-220 Bipolar (BJT) ROHS
The MJE15031 is a bipolar made by onsemi in a TO-220 package with 3 pins. -65℃~+150℃ 1 PNP 10uA 150V 20 30MHz 500mV 50W 5V 8A PNP TO-220 Bipolar (BJT) ROHS.
PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PNP_1B_2C_3E, from PCBKit's generic symbols) and its footprint (Source_Footprints:TO-220-3, from Digikey), ready for a KiCad board. 980 are in stock at JLCPCB (part C146722). 4 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | B | Input |
| 2 | C | Passive |
| 3 | E | Passive |

antonloof/4x_power_opamp
Four power amplifiers used for driving large ish loads from pwm ouputs

ereisch/Data_East_PS
Data East pinball power supply board, replacement for 520-5047-02

Synthron/SymAsym
High Power Audio Amplifier based on the Red Devil SymAsym PCBs from audiopcb.de

Yes. The symbol is Pinmap_Generic:Q_PNP_1B_2C_3E and the footprint Source_Footprints:TO-220-3, both drawn on this page. PCBKit places them on a board for you when you design with it.
TO-220, with 3 pins. Its footprint is drawn on this page.
onsemi publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C146722, with 980 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the MJE15033 by onsemi, the MJE15030 by onsemi and the MJE15033G by SPTECH. Check their datasheets: a part that fits the footprint may still differ in its ratings.
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.