Skip to the content
PCBKitNew board
MID400 on a board, in 3D

MID400

onsemi

-40℃~+85℃ 1 1.5V 115mW 150uA 1ms 1ms 2.5kV 20mA 4.5V~5.5V DIP-8 Logic Output Optoisolators ROHS

Extended
DatasheetJLCPCBLCSConsemi/MID400
Category
Logic Output Optoisolators
Package
DIP-8
Pins
8

Overview

The MID400 is a logic Output Optoisolator made by onsemi in a DIP-8 package with 8 pins. -40℃~+85℃ 1 1.5V 115mW 150uA 1ms 1ms 2.5kV 20mA 4.5V~5.5V DIP-8 Logic Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Isolator:MID400, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C899754). 1 open-source board in 1 repository on GitHub use it.

Symbol

VIN11VIN23GND5VO6AUX7VCC8
Isolator:MID400From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

From the datasheet

8
Supply, absolute maximum
7 V · VCC, absolute maximum · p. 2
Works from
-40 °C · operating ambient, min · p. 2
Works up to
85 °C · operating ambient, max · p. 2
Junction, hottest
100 °C · junction temperature, max · p. 2
Takes working
3 mA · VCC, output low, IIN(RMS) = 4.0 mA, VCC = 5.5 V, max · p. 3
Takes at most
3 mA · VCC, output low, IIN(RMS) = 4.0 mA, VCC = 5.5 V, max · p. 3
A pin gives at most
20 mA · IOL, output sink current, absolute maximum · p. 2
Forward voltage
1.5 V · input LED, IIN(DC) = ±30 mA, max · p. 3

Parameters

17
Current - Supply
3mA
Current - Supply(Max)
3mA
Features
Open-collector output
Forward Current(If)
30mA
High level Delay Time
1ms
Input threshold current
150uA
Isolation Voltage(Vrms)
2.5kV
Junction Temperature(Max)
100℃
Low level Delay Time
1ms
Number of Channels
1
Operating Temperature
-40℃~+85℃
Output Current per Pin(Max)
20mA
Output current
20mA
Voltage - Forward(Vf)
1.5V
Voltage - Supply
4.5V~5.5V
Voltage - Supply(Absolute Max)
7V
power dissipation
115mW

Order codes

1

Pinout

8
The pins of the MID400
PinNameType
1VIN1Input
2NCNot connected
3VIN2Input
4NCNot connected
5GNDPower in
6VOOpen collector
7AUXPassive
8VCCPower in

Open-source boards using it

All 1
  • 2 layers80 × 90 mmWiFi Septic Controller, the printed circuit board in 3D

    WiFi Septic Controller

    mikelawrence/WiFi-Septic-Controller

    WiFi enabled Septic Controller

    104 parts8MIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/onsemi/MID400" title="MID400 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/onsemi/MID400.jpg" alt="MID400" width="1200" height="900">
A picture that opens the part, for a README
[![MID400](https://pcbkit.io/embed/parts/onsemi/MID400.jpg?size=s)](https://pcbkit.io/parts/onsemi/MID400)

Questions

Is there a KiCad symbol and footprint for the MID400?

Yes. The symbol is Isolator:MID400 and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MID400?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MID400 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MID400?

JLCPCB lists it as part C899754, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MID400?

Parts like it in the library: the HCPL-3120-000E by Broadcom Limited, the HCPL-3120-500E by AVAGO, the HCPL-2631-500E by Broadcom Limited and the HCPL-3120-560E by Broadcom Limited. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MID400?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8