
MBRD835L
onsemi
Switch-mode Power Rectifier
- Part id
- onsemi/MBRD835L
- Category
- Uncategorised
- Package
- DPAK
- Pins
- 3
- Used on
- 2 open-source boards
Overview
The MBRD835L is an uncategorised made by onsemi in a DPAK package with 3 pins. Switch-mode Power Rectifier.
PCBKit's library has its KiCad symbol (Diodes:Diode A1A2_C3, from CERN's library) and its footprint (ICs And Semiconductors SMD:TO228P991X239-3N-R552X520, from CERN's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
3| Pin | Name | Type |
|---|---|---|
| 1 | A | Passive |
| 2 | A | Passive |
| 3 | C | Passive |
Open-source boards using it
2- 2 layers161 × 87 mm

- 4 layers32 × 48 mm

Parts like it
8NCP1117DT50
DPAK5V 1A Low-Dropout Positive Voltage RegulatoronsemiUncategorisedIRFR3806
DPAK60V 43A N-Channel HEXFET Power MOSFETInfineon TechnologiesUncategorisedIRFR4105Z
DPAK55V, 30A, N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedIRFR420
DPAK500V, 2.4A, N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedFDD16AN08A0-F085
DPAK75V 50A N-Channel UltraFET Trench MOSFETonsemiUncategorisedMJD3055
DPAK60V 10A 20W NPN Power TransistoronsemiUncategorisedNCP1117DT15RK
DPAK1.5V 1A Low-Dropout Positive Voltage RegulatoronsemiUncategorisedNCP1117DT33
DPAK3.3V 1A Low-Dropout Positive Voltage RegulatoronsemiUncategorised
Questions
Is there a KiCad symbol and footprint for the MBRD835L?
Yes. The symbol is Diodes:Diode A1A2_C3 and the footprint ICs And Semiconductors SMD:TO228P991X239-3N-R552X520, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MBRD835L?
DPAK, with 3 pins. Its footprint is drawn on this page.
What can replace the MBRD835L?
Parts like it in the library: the NCP1117DT50 by onsemi, the IRFR3806 by Infineon Technologies, the IRFR4105Z by Infineon Technologies and the IRFR420 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MBRD835L?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.