Skip to the content
12

MBR1H100SF

onsemiExtended

-65℃~+175℃ 1 Independent 100V 1A 40uA@100V 50A 760mV@1A SOD-123FL Schottky Diodes ROHS

Part id
onsemi/MBR1H100SF
Category
Schottky Diodes
Package
SOD-123FL
Pins
2
In stock
19,402 at JLCPCB (C235757)
Used on
1 open-source board

Overview

The MBR1H100SF is a schottky Diode made by onsemi in a SOD-123FL package with 2 pins. -65℃~+175℃ 1 Independent 100V 1A 40uA@100V 50A 760mV@1A SOD-123FL Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123F, from KiCad's library), ready for a KiCad board. 19,402 are in stock at JLCPCB (part C235757). 1 open-source board in 1 repository on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123FFrom KiCad's library

From the datasheet

9
Reverse voltage, most
100 V · max peak repetitive reverse voltage · p. 3
Forward current, most
1 A · max average rectified forward current, TL = 162°C · p. 3
Junction, hottest
175 °C · max operating junction temperature · p. 3
Junction to air (SOD−123FL)
85 K/W · junction to ambient, 700 mm2 copper pad, 1 oz FR4 board · p. 3
Junction to air (SOD−123FL)
330 K/W · junction to ambient, approximately 20 mm2 copper pad, 1 oz FR4 board · p. 3
Forward voltage
760 mV · max at IF = 1.0 A, TJ = 25°C · p. 3
Forward voltage
840 mV · max at IF = 2.0 A, TJ = 25°C · p. 3
Forward voltage
610 mV · max at IF = 1.0 A, TJ = 125°C · p. 3
Forward voltage
680 mV · max at IF = 2.0 A, TJ = 125°C · p. 3

What it is and has

8
Package
SOD-123FL · p. 2
Protection
Guardring for stress protection · p. 2
Forward voltage
Low forward voltage · p. 2
Operating junction temperature
175°C · p. 2
Flammability
Epoxy meets UL 94 V−0 · p. 2
ESD rating
Machine Model, C · p. 2
ESD rating
Human Body Model, 3B · p. 2
Moisture sensitivity
MSL 1 · p. 2

Specifications

13
ParameterConditionsAs printedPage
Peak Repetitive Reverse Voltage / Working Peak Reverse Voltage / DC Blocking Voltage VRRM / VRWM / VRShared rating for all three reverse-voltage parametersmax 100 V3
Average Rectified Forward Current IOTL = 162°Cmax 1 A3
Non−Repetitive Peak Surge Current IFSMSurge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hzmax 50 A3
Storage and Operating Junction Temperature Range (Note 1) Tstg, TJThe heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.min -65 · max 175 °C3
Thermal Resistance, Junction−to−Lead (Note 2) YJCLMounted with 700 mm2 copper pad size (Approximately 1 in2) 1 oz FR4 Boardtyp 23 °C/W3
Thermal Resistance, Junction−to−Ambient (Note 2) RqJAMounted with 700 mm2 copper pad size (Approximately 1 in2) 1 oz FR4 Boardtyp 85 °C/W3
Thermal Resistance, Junction−to−Ambient (Note 3) RqJAMounted with pad size approximately 20 mm2 copper, 1 oz FR4 Boardtyp 330 °C/W3
Maximum Instantaneous Forward Voltage (Note 4) VFIF = 1.0 A, TJ = 25°C; Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%max 0.76 V3
Maximum Instantaneous Forward Voltage (Note 4) VFIF = 2.0 A, TJ = 25°C; Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%max 0.84 V3
Maximum Instantaneous Forward Voltage (Note 4) VFIF = 1.0 A, TJ = 125°C; Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%max 0.61 V3
Maximum Instantaneous Forward Voltage (Note 4) VFIF = 2.0 A, TJ = 125°C; Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%max 0.68 V3
Maximum Instantaneous Reverse Current (Note 4) IRRated dc Voltage, TJ = 25°C; Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%max 40 mA3
Maximum Instantaneous Reverse Current (Note 4) IRRated dc Voltage, TJ = 125°C; Pulse Width ≤ 380 ms, Duty Cycle ≤ 2.0%max 0.5 mA3

Ordering codes, by the datasheet

2
MBR1H100SFT3G
SOD−123 (Pb−Free) · 10000/Tape & Reel · p. 2
NRVB1H100SFT3G
SOD−123 (Pb−Free) · Automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable; 10000/Tape & Reel · p. 2

Open-source boards using it

1
  • 4 layers106 × 110 mmRearCircuitBoard 10, the printed circuit board in 3D

    RearCircuitBoard 10

    ssbingo/samba-solar-track

    Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)

    329 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MBR1H100SF?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-123F, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MBR1H100SF?

SOD-123FL, with 2 pins. Its footprint is drawn on this page.

Where is the MBR1H100SF datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MBR1H100SF?

JLCPCB lists it as part C235757, with 19,402 in stock; the sellers' links on this page open their listings.

What can replace the MBR1H100SF?

Parts like it in the library: the DSK120 by hongjiacheng, the DSK210 by hongjiacheng, the DSK310 by hongjiacheng and the DSS210 by BORN. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MBR1H100SF?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.