MBR130LSF

onsemi

-55℃~+125℃ 1 Independent 1A 1mA@30V 30V 380mV@1A 40A SOD-123FL Schottky Diodes ROHS

Extended

Datasheetonsemi/MBR130LSF

Category: Schottky Diodes
Package: SOD-123FL
Pins: 2

Overview

The MBR130LSF is a schottky Diode made by onsemi in a SOD-123FL package with 2 pins. -55℃~+125℃ 1 Independent 1A 1mA@30V 30V 380mV@1A 40A SOD-123FL Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123F, from KiCad's library), ready for a KiCad board. 62,729 are in stock at JLCPCB (part C235756).

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

Diode_SMD:D_SOD-123FFrom KiCad's library

From the datasheet

Reverse voltage, most: 30 V · maximum peak repetitive reverse voltage · p. 2
Forward current, most: 1 A · maximum average rectified forward current, rated VR, TL = 117°C · p. 2
Junction, hottest: 125 °C · maximum operating junction temperature · p. 2
Junction to air (SOD−123FL): 325 K/W · junction to ambient, minimum recommended pad size, FR4 · p. 2
Junction to air (SOD−123FL): 82 K/W · junction to ambient, copper pad area 700 mm2 · p. 2
Forward voltage: 290 mV · max at IF = 0.1 A, TJ = 25°C · p. 2
Forward voltage: 180 mV · max at IF = 0.1 A, TJ = 100°C · p. 2
Forward voltage: 360 mV · max at IF = 0.7 A, TJ = 25°C · p. 2
Forward voltage: 270 mV · max at IF = 0.7 A, TJ = 100°C · p. 2
Forward voltage: 380 mV · max at IF = 1.0 A, TJ = 25°C · p. 2
Forward voltage: 300 mV · max at IF = 1.0 A, TJ = 100°C · p. 2

What it is and has

Protection: Guardring for Stress Protection · p. 1
Forward voltage: Low Forward Voltage · p. 1
Epoxy flammability: UL 94 V−0 · p. 1
Compliance: Pb−Free and RoHS Compliant · p. 1
Moisture sensitivity: MSL 1 · p. 1
Polarity marking: Cathode Band · p. 1

Specifications

Parameter	Conditions	As printed	Page
Peak Repetitive Reverse Voltage / Working Peak Reverse Voltage / DC Blocking Voltage VRRM / VRWM / VR		max 30 V	2
Average Rectified Forward Current IO	At Rated VR, TL = 117°C	max 1 A	2
Peak Repetitive Forward Current IFRM	At Rated VR, Square Wave, 100 kHz, TL = 110°C	max 2 A	2
Non−Repetitive Peak Surge Current IFSM	Non−Repetitive peak surge current, halfwave, single phase, 60 Hz	max 40 A	2
Storage Temperature Tstg		min -55 · max 150 °C	2
Operating Junction Temperature TJ		min -55 · max 125 °C	2
Voltage Rate of Change dv/dt	Rated VR, TJ = 25°C	max 10000 V/ms	2
Thermal Resistance, Junction−to−Lead Rtjl	SOD−123FL; Note 1: Mounted with minimum recommended pad size, PC Board FR4.	max 26 °C/W	2
Thermal Resistance, Junction−to−Lead Rtjl	SOD−123FL; Note 2: Mounted with 1 in. copper pad (Cu area 700 mm2).	max 21 °C/W	2
Thermal Resistance, Junction−to−Ambient Rtja	SOD−123FL; Note 1: Mounted with minimum recommended pad size, PC Board FR4.	max 325 °C/W	2
Thermal Resistance, Junction−to−Ambient Rtja	SOD−123FL; Note 2: Mounted with 1 in. copper pad (Cu area 700 mm2).	max 82 °C/W	2
Maximum Instantaneous Forward Voltage VF	IF = 0.1 A; TJ = 25°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 0.29 V	2
Maximum Instantaneous Forward Voltage VF	IF = 0.1 A; TJ = 100°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 0.18 V	2
Maximum Instantaneous Forward Voltage VF	IF = 0.7 A; TJ = 25°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 0.36 V	2
Maximum Instantaneous Forward Voltage VF	IF = 0.7 A; TJ = 100°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 0.27 V	2
Maximum Instantaneous Forward Voltage VF	IF = 1.0 A; TJ = 25°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 0.38 V	2
Maximum Instantaneous Forward Voltage VF	IF = 1.0 A; TJ = 100°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 0.3 V	2
Maximum Instantaneous Reverse Current IR	VR = 30 V; TJ = 25°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 1 mA	2
Maximum Instantaneous Reverse Current IR	VR = 30 V; TJ = 100°C; Pulse Width ≤ 250 ms, Duty Cycle ≤ 2%	max 25 mA	2

Ordering codes, by the datasheet

MBR130LSFT1G: SOD−123FL · Pb−Free; 3000/Tape & Reel · p. 1
NRVB130LSFT1G: SOD−123FL · Pb−Free; 3000/Tape & Reel; automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable · p. 1

Parameters

Current - Rectified: 1A
Diode Configuration: 1 Independent
Junction Temperature(Max): 125℃
Non-Repetitive Peak Forward Surge Current: 40A
Operating Junction Temperature Range: -55℃~+125℃
Reverse Leakage Current (Ir): 1mA@30V
Thermal Resistance(Junction to Ambient): 325℃/W
Voltage - DC Reverse(Vr): 30V
Voltage - Forward(Vf): 290mV
Voltage - Forward(Vf@If): 380mV@1A

Order codes

MBR130LSFT1GLCSC C235756

Pinout

The pins of the MBR130LSF
Pin	Name	Type
1	K	Passive
2	A	Passive

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/onsemi/MBR130LSF" title="MBR130LSF in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/onsemi/MBR130LSF.jpg" alt="MBR130LSF" width="1200" height="900">

A picture that opens the part, for a README

[![MBR130LSF](https://pcbkit.io/embed/parts/onsemi/MBR130LSF.jpg?size=s)](https://pcbkit.io/parts/onsemi/MBR130LSF)

Questions

Is there a KiCad symbol and footprint for the MBR130LSF?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-123F, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MBR130LSF?

SOD-123FL, with 2 pins. Its footprint is drawn on this page.

Where is the MBR130LSF datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MBR130LSF?

JLCPCB lists it as part C235756, with 62,729 in stock; the sellers' links on this page open their listings.

What can replace the MBR130LSF?

Parts like it in the library: the DSK34 by hongjiacheng, the DSK120 by hongjiacheng, the DSK210 by hongjiacheng and the DSK24 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.