LP2951CDM-3.0
onsemiExtended
-40℃~+125℃@(Ta) 1 100mA 30V 380mV@(100mA) 3V 75uA Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection Positive Micro8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- onsemi/LP2951CDM-3.0
- Category
- DC DC Converters
- Package
- Micro8
- Pins
- 8
- In stock
- 0 at JLCPCB (C894892)
Overview
The LP2951CDM-3.0 is a DC DC Converter made by onsemi in a Micro8 package with 8 pins. -40℃~+125℃@(Ta) 1 100mA 30V 380mV@(100mA) 3V 75uA Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection Positive Micro8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LP2951ACD-3.3G, from EasyEDA) and its footprint (EasyEDA_Cloud:MSOP-8_L3.0-W3.0-P0.65-LS4.9-TL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C894892).
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | Output | Unspecified |
| 2 | Sense | Unspecified |
| 3 | Shutdown | Unspecified |
| 4 | GND | Unspecified |
| 5 | Error#Output | Unspecified |
| 6 | VO TAP | Unspecified |
| 7 | Feedback | Unspecified |
| 8 | INPUT | Unspecified |
Parts like it
8TPS61024DRC
VSON-10-EP(3x3)-40℃~+85℃@(TA) 1 1.5A 3V 600kHz 900mV~6.5V Boost Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS61005DGS
VSSOP-10-0.5mm-40℃~+85℃@(TA) 1 1.3A 3V 500kHz 800mV~3V Boost Boost Built-in Fixed No VSSOP-10-0.5mm DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersS-8354C30MA-JSPT2U
SOT-23-3-40℃~+85℃ 1 231mA 30kHz 3V 900mV~10V Boost Boost Built-in No SOT-23-3 DC-DC Converters ROHSABLICDC-DC ConvertersHT7730A
SOT-23-51 200kHz 200mA 3V 6V Boost Boost Built-in No SOT-23-5 DC-DC Converters ROHSHoltek SemiconDC-DC ConvertersMAX1833ETT30+T
-Boost Yes - DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC ConvertersLM2852XMXA-3.0
HTSSOP-14-EP-40℃~+125℃@(TJ) 1 1.5MHz 2.85V~5.5V 2A 3V Buck Buck Built-in Fixed Yes HTSSOP-14-EP DC-DC ConvertersTexas InstrumentsDC-DC ConvertersTPS60125PWPG4
HTSSOP-20-EP-40℃~+85℃ 1.8V~3.6V 200mA 3V 55uA Charge pump / inverting topology switching、Output short-circuit protection、Low-power standby、Load disconnect Support boost converter HTSSOP-20-EP Charge Pumps ROHSTexas InstrumentsDC-DC ConvertersTPS61015DGS
VSSOP-10-0.5mm-40℃~+85℃@(TA) 1 3V 500kHz 800mV~3V Boost Boost Built-in Fixed Yes VSSOP-10-0.5mm DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LP2951CDM-3.0?
Yes. The symbol is EasyEDA_Cloud:LP2951ACD-3.3G and the footprint EasyEDA_Cloud:MSOP-8_L3.0-W3.0-P0.65-LS4.9-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LP2951CDM-3.0?
Micro8, with 8 pins. Its footprint is drawn on this page.
Where is the LP2951CDM-3.0 datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the LP2951CDM-3.0?
JLCPCB lists it as part C894892, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LP2951CDM-3.0?
Parts like it in the library: the TPS61024DRC by Texas Instruments, the TPS61005DGS by Texas Instruments, the S-8354C30MA-JSPT2U by ABLIC and the HT7730A by Holtek Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.