Skip to the content
123

LM340T-50

onsemiExtended

- Interface - Specialized ROHS

Part id
onsemi/LM340T-50
Category
Interface, Specialized
Pins
5
In stock
0 at JLCPCB (C17300918)
Used on
2 open-source boards

Overview

The LM340T-50 is an interface, Specialized made by onsemi with 3 pins. - Interface - Specialized ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3 1IN-2GND-3OUT, from CERN's library) and its footprint (ICs And Semiconductors THD:TO-220-v, from CERN's library), ready for a KiCad board. JLCPCB lists it (part C17300918). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1IN2GND3OUT
Regulators:REG3 1IN-2GND-3OUTFrom CERN's library

Footprint

123
ICs And Semiconductors THD:TO-220-vFrom CERN's library

Pinout

3
The pins of the LM340T-50
PinNameType
1INInput
2GNDPower in
3OUTPower in

Open-source boards using it

2
  • 2 layers279 × 200.3 mmK-1013-floppy controller replica, the printed circuit board in 3D

    K-1013-floppy controller replica

    eduardocasino/k-1013-floppy-disk-controller-replica

    MTU's K-1013 Rev. D Floppy DIsk Controller replica

    257 parts3
  • 2 layers279 × 134.6 mmK-1008-visable memory, the printed circuit board in 3D

    K-1008-visable memory

    schenkmi/electronic-retro-computing-projects

    In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

    144 parts

Questions

Is there a KiCad symbol and footprint for the LM340T-50?

Yes. The symbol is Regulators:REG3 1IN-2GND-3OUT and the footprint ICs And Semiconductors THD:TO-220-v, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where can I order the LM340T-50?

JLCPCB lists it as part C17300918, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the LM340T-50?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.