FT3001MPX
onsemiExtended
-40℃~+85℃@(TA) 1 1.65V~5V 400ms Active Low Manual reset input Open-drain、Push-pull Voltage monitor MLP-8(2x2) Supervisor and Reset ICs ROHS
- Part id
- onsemi/FT3001MPX
- Category
- Supervisor And Reset ICs
- Package
- MLP-8(2x2)
- Pins
- 5
- In stock
- 0 at JLCPCB (C3686170)
Overview
The FT3001MPX is a supervisor And Reset IC made by onsemi in a MLP-8(2x2) package with 9 pins. -40℃~+85℃@(TA) 1 1.65V~5V 400ms Active Low Manual reset input Open-drain、Push-pull Voltage monitor MLP-8(2x2) Supervisor and Reset ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:FT3001MPX, from EasyEDA) and its footprint (EasyEDA_Cloud:MLP-8_L2.0-W2.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3686170).
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | RST2 | Unspecified |
| 2 | GND | Unspecified |
| 3 | SR1# | Unspecified |
| 4 | RST1# | Unspecified |
| 5 | DSR0 | Unspecified |
| 6 | TRIG | Unspecified |
| 7 | SR0# | Unspecified |
| 8 | VCC | Unspecified |
| 9 | EP | Unspecified |
Questions
Is there a KiCad symbol and footprint for the FT3001MPX?
Yes. The symbol is EasyEDA_Cloud:FT3001MPX and the footprint EasyEDA_Cloud:MLP-8_L2.0-W2.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the FT3001MPX?
MLP-8(2x2), with 9 pins. Its footprint is drawn on this page.
Where is the FT3001MPX datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the FT3001MPX?
JLCPCB lists it as part C3686170, with 0 in stock; the sellers' links on this page open their listings.