onsemiExtended
-40℃~+85℃ 1 2.8V~36V 2A 88mΩ Active Low Load Switch Under-voltage lockout、Overcurrent Protection、Over temperature protection、Latch protection、Short-Circuit Protection SO-8 Power Distribution Switches ROHS
The FPF2700MX is a power Distribution Switche made by onsemi in a SO-8 package with 8 pins. -40℃~+85℃ 1 2.8V~36V 2A 88mΩ Active Low Load Switch Under-voltage lockout、Overcurrent Protection、Over temperature protection、Latch protection、Short-Circuit Protection SO-8 Power Distribution Switches ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:FPF2700, from Tinkerforge) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C328059). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VIN | Passive |
| 2 | PGOOD | Passive |
| 3 | ISET | Passive |
| 4 | ON | Passive |
| 5 | GND | Passive |
| 6 | NC | Passive |
| 7 | FLAGB | Passive |
| 8 | VOUT | Passive |
nickraymond/nereus_Pi_shield_ADIN2111
A Raspberry Pi Zero 2W shield built from a copy of the Sofar Bristlemouth mote: ADIN2111 two-port 10BASE-T1L with PoDL, powered from the bus, 5 V for the Pi, a 24 V payload port, and the Sofar mote's power path…
Yes. The symbol is tinkerforge:FPF2700 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SO-8, with 8 pins. Its footprint is drawn on this page.
onsemi publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C328059, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the NCV8402ADD by onsemi, the TPS2052BD by Texas Instruments, the BV1HD090FJ-CE2 by ROHM Semiconductor and the VNLD5160TR-E by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.