
FPF2286UCX
onsemiExtended
-40℃~+85℃ 1 2.8V~23V 25mΩ 3.5A Active Low Load Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Over Temperature Protection WLCSP-6(0.9x1.3) Power Distribution Switches ROHS
- Part id
- onsemi/FPF2286UCX
- Category
- Power Distribution Switches
- Package
- WLCSP-6(0.9x1.3)
- Pins
- 6
- In stock
- 77 at JLCPCB (C891243)
- Used on
- 4 open-source boards
Overview
The FPF2286UCX is a power Distribution Switche made by onsemi in a WLCSP-6(0.9x1.3) package with 6 pins. -40℃~+85℃ 1 2.8V~23V 25mΩ 3.5A Active Low Load Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Over Temperature Protection WLCSP-6(0.9x1.3) Power Distribution Switches ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SGM40660YG_TR, from EasyEDA) and its footprint (EasyEDA_Cloud:WLCSP-6_L1.2-W1.0-R2-C3-P0.40-BL, from EasyEDA), ready for a KiCad board. 77 are in stock at JLCPCB (part C891243). 4 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 2.8 V · VIN, recommended operating min · p. 4
- Supply, most
- 23 V · VIN, recommended operating max · p. 4
- Supply, absolute maximum
- 28 V · VIN, absolute max · p. 4
- Works from
- -40 °C · ambient temperature min · p. 4
- Works up to
- 85 °C · ambient temperature max · p. 4
- Junction, hottest
- 150 °C · junction temperature absolute max · p. 4
- Takes working
- 85 mA · VIN quiescent current typical, VIN = 5 V, VOVLO = 0.6 V · p. 5
- Gives
- 3.5 A · recommended output current max · p. 4
- Junction to air (WLCSP−6)
- 121.7 K/W · junction-to-air resistance, 2S2P JEDEC PCB · p. 4
What it is and has
6- Overvoltage protection
- Up to +28 V · p. 2
- Overvoltage lockout
- Programmable · p. 2
- Protection
- Short circuit protection and auto-restart · p. 2
- Protection
- Thermal shutdown · p. 2
- ESD, HBM
- 2 kV · p. 2
- ESD, CDM
- 1 kV · p. 2
Around it
2- cap 0.1 mF
- between IN and GND; Minimum; ceramic or tantalum, connected close to the package. · p. 6
- cap 0.1 mF
- between OUT and GND; Minimum output decoupling capacitance; may be increased for load transients; no minimum ESR required. · p. 6
Specifications
35| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input Voltage Range (Note 1) Vin | min -0.3 · max 28 V | 4 | |
| Output Voltage Range Vout | Maximum: (Vin + 0.3) V | min -0.3 V | 4 |
| Adjustable Input Range VOVLO | min -0.3 · max 23 V | 4 | |
| Internal FET continuous current IOUT | min 0 · max 4 A | 4 | |
| Maximum Junction Temperature TJ(max) | max 150 °C | 4 | |
| Storage Temperature Range TSTG | min -65 · max 150 °C | 4 | |
| ESD Capability, Human Body Model (Note 2) ESDHBM | max 2 kV | 4 | |
| ESD Capability, Charged Device Model (Note 2) ESDCDM | max 1 kV | 4 | |
| Lead Temperature Soldering TSLD | Reflow (SMD Styles Only), Pb−Free Versions (Note 3) | max 260 °C | 4 |
| Thermal Resistance, Junction−to−Air (Note 5) RθJA | WLCSP−6; values based on 2S2P JEDEC std. PCB | typ 121.7 °C/W | 4 |
| Supply Voltage on VIN Vin | min 2.8 · max 23 V | 4 | |
| I/O pins VOVLO | min 0 · max 5.5 V | 4 | |
| Output Current Iout | min 0 · max 3.5 A | 4 | |
| IN Capacitor Cin | min 0.1 mF | 4 | |
| OUT Capacitor Cout | min 0.1 mF | 4 | |
| Ambient Temperature TA | min -40 · max 85 °C | 4 | |
| Input Quiescent Current on VIN IQ | VIN = 5 V, VOVLO = 0.6 V | typ 85 mA | 5 |
| Input Quiescent Current on VIN IQ | VIN = 20 V, VOVLO = 0.6 V | typ 200 mA | 5 |
| Supply Current during Over Voltage IIN_Q | VIN = 23 V, VOVLO = 3.0 V, VOUT = 0 V | typ 215 mA | 5 |
| OVLO Input Leakage Current IOVLO | VOVLO = VOVLO_TH | min -100 · max 100 nA | 5 |
| Under−Voltage Rising Trip Level for VIN VIN_UV_R | VIN rising, TA = −40 to 85°C | min 2.3 · typ 2.5 · max 2.7 V | 5 |
| Under−Voltage Falling Trip Level for VIN VIN_UV_F | VIN falling, TA = −40 to 85°C | typ 2.4 V | 5 |
| Default Over−Voltage Trip Level VIN_OVLO | VIN rising, TA = −40 to 85°C | min 6.6 · typ 6.8 · max 7 V | 5 |
| OVLO set threshold VOVLO_TH | VOVLO = 1.1 V to 1.3 V, the voltage of OVLO to trigger Over Voltage condition | min 1.16 · typ 1.19 · max 1.22 V | 5 |
| OVLO threshold hysteresis VHYS_OVLO | typ 2 % | 5 | |
| Adjustable OVLO range VOV_RNG | OV_MODE = 0, VOVLO > 0.5 V | min 4 · max 23 V | 5 |
| OVLO Input Threshold Voltage, Voltage Increasing, Logic High VIH_OVLO | High | min 0.3 V | 5 |
| OVLO Input Threshold Voltage, Voltage Decreasing, Logic Low VIL_OVLO | Low | max 0.15 V | 5 |
| On−resistance of Power FET rON | VIN = 5 V, IOUT = 500 mA, TA = 25°C | typ 25 · max 35 mW | 5 |
| De−bounce Time of Power FET turned on tSW_DEB | Time from 2.5 V < VIN < VIN_OVLO to VOUT = 0.1 × VIN | typ 15 ms | 5 |
| Switch Turn−On rising Time (Note 8) tR | VIN = 5 V, RL = 100 W, CL = 22 mF, VOUT from 0.1 × VIN to 0.9 × VIN | typ 1 ms | 5 |
| Switch Turn−Off Time (Note 8) | RL = 10 W, CL = 0 mF, time from VIN > VOVLO to VOUT = 0.9 × VIN; Internal OVP level | typ 40 ns | 5 |
| Switch Turn−Off Time (Note 8) | RL = 10 W, CL = 0 mF, time from VIN > VOVLO to VOUT = 0.9 × VIN; External OVP level (Note 9) | typ 100 ns | 5 |
| Thermal Shutdown Temperature (Note 8) TSD | typ 130 °C | 5 | |
| Thermal Shutdown Hysteresis (Note 8) TSH | typ 20 °C | 5 |
Pins, by the datasheet
6- A2 IN
- Switch input and device supply. · p. 3
- B2 IN
- Switch input and device supply. · p. 3
- A1 OUT
- Switch output to load. · p. 3
- B1 OUT
- Switch output to load. · p. 3
- C2 OVLO
- Over Voltage Lockout Adjustment Input. · p. 3
- C1 GND
- Ground. · p. 3
Ordering codes, by the datasheet
1- FPF2286UCX
- WLCSP−6L · Default OV level 6.8 V; marking 3F; 3000 / Tape & Reel · p. 6
Open-source boards using it
4- 6 layers25.4 × 50.8 mm

- 6 layers54.6 × 19.6 mm

- 6 layers55.6 × 19.6 mm

- 6 layers75.4 × 19.6 mm

Questions
Is there a KiCad symbol and footprint for the FPF2286UCX?
Yes. The symbol is EasyEDA_Cloud:SGM40660YG_TR and the footprint EasyEDA_Cloud:WLCSP-6_L1.2-W1.0-R2-C3-P0.40-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the FPF2286UCX?
WLCSP-6(0.9x1.3), with 6 pins. Its footprint is drawn on this page.
Where is the FPF2286UCX datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the FPF2286UCX?
JLCPCB lists it as part C891243, with 77 in stock; the sellers' links on this page open their listings.
Which open-source boards use the FPF2286UCX?
4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.