
DTC143E
onsemiExtended
1 NPN 100mA 100nA 350mW 50V NPN - Bipolar (BJT)
- Part id
- onsemi/DTC143E
- Category
- Bipolar (BJT)
- Pins
- 5
- In stock
- 0 at JLCPCB (C3196166)
- Used on
- 9 open-source boards
Overview
The DTC143E is a bipolar made by onsemi with 3 pins. 1 NPN 100mA 100nA 350mW 50V NPN - Bipolar (BJT).
PCBKit's library has its KiCad symbol (Transistor_BJT:DTC143E, from KiCad's library) and its footprint (EasyEDA_Cloud:TO-92-3_L4.8-W3.7-P1.27-L-1, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3196166). 9 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
Pinout
3| Pin | Name | Type |
|---|---|---|
| 1 | B | Input |
| 2 | E | Passive |
| 3 | C | Passive |
- 4 layers40.6 × 17.8 mm

- 2 layers50.3 × 50 mm

- 4 layers40.9 × 23.7 mm

- 2 layers37.8 × 16.2 mm

- 2 layers135 × 35 mm

Printhead pcb
Fiberprinter/fiberprinter-electronics
Fiberelectronics Control every pulse, master every micron
78 parts4 - 2 layers68.9 × 121.6 mm

- 2 layers68.9 × 121.6 mm

- 2 layers68.9 × 121.6 mm

Parts like it
8DTC143T
TO-92-3-55℃~+150℃ 1 NPN 100mA 100nA 250mV 350mW 50V 6V NPN TO-92-3 Bipolar (BJT)onsemiBipolar (BJT)KSP94BU-FS
TO-92-31 PNP 100nA 300mA 400V 50 625mW 6V 750mV PNP Standalone TO-92-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)STPSA92
TO-92-3100nA 300V 40 500mA 500mV 50MHz 625mW PNP TO-92-3 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)STX83003
TO-92-31 NPN 1.5W 16 18V 1A 1V 1mA 400V NPN Standalone TO-92-3 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)ZTX951
E-Line-3-55℃~+200℃@(Tj) 1.2W 100@1A,1V 120MHz 300mV@4A,400mA 4A 50nA 60V PNP E-Line(TO-92) Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)DTC114T
--55℃~+150℃ 1 NPN 100mA 100nA 350mW 50V NPN - Bipolar (BJT)onsemiBipolar (BJT)DTC124E
--55℃~+150℃ 100mA 100nA 350mW 50V 6V NPN - Bipolar (BJT)onsemiBipolar (BJT)2N3859A
TO-92-3-55℃~+150℃ 1 NPN 100 250MHz 500mA 500nA 60V 625mW 6V NPN Standalone TO-92-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)
Questions
Is there a KiCad symbol and footprint for the DTC143E?
Yes. The symbol is Transistor_BJT:DTC143E and the footprint EasyEDA_Cloud:TO-92-3_L4.8-W3.7-P1.27-L-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the DTC143E datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the DTC143E?
JLCPCB lists it as part C3196166, with 0 in stock; the sellers' links on this page open their listings.
What can replace the DTC143E?
Parts like it in the library: the DTC143T by onsemi, the KSP94BU-FS by onsemi, the STPSA92 by STMicroelectronics and the STX83003 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DTC143E?
9 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.