2 layers125 × 95 mm
Vanchor helm
AlexAsplund/vanchor-pcb
95×92 mm 2-layer board. Full H-bridge for a 12–24 V brushed trolling motor, controlled by the vanchor-helm board over one straight 8-wire cable. Two build variants share the same PCB:
69 parts
BZX85C12
onsemiExtended
-65℃~+200℃ 1 Independent 11.4V~12.7V 12V 1W 350Ω 500nA@8.4V 9Ω DO-41 Zener Diodes ROHS
- Part id
- onsemi/BZX85C12
- Category
- Zener Diodes
- Package
- DO-41
- Pins
- 2
- In stock
- 2,988 at JLCPCB (C890279)
- Used on
- 6 open-source boards
Overview
The BZX85C12 is a zener Diode made by onsemi in a DO-41 package with 2 pins. -65℃~+200℃ 1 Independent 11.4V~12.7V 12V 1W 350Ω 500nA@8.4V 9Ω DO-41 Zener Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (ICs And Semiconductors THD:DO-41, from CERN's library), ready for a KiCad board. 2,988 are in stock at JLCPCB (part C890279). 6 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | K | Passive |
| 2 | A | Passive |
Open-source boards using it
6- 4 layers114.3 × 134.5 mm
Exoskeleton
Bihyungbetter/exoskeleton
Exoskeleton is a powered lower-limb exoskeleton with six actuated joints — hip flexion, hip abduction, and knee flexion per leg.
60 parts - 2 layers120 × 90 mm
CapacitorDischarger
CatalinSerafimescu/CapacitorDischarger
A professional, handheld capacitor discharger designed for safely discharging high-voltage capacitors in hobby electronics restoration — tube amplifiers, vintage radios, CRT televisions, and consumer power supplies.
43 parts - 2 layers92 × 51 mm
- 2 layers88 × 46 mm
- 2 layers100 × 75 mm
CapacitorDischarger 1S
CatalinSerafimescu/CapacitorDischarger
A professional, handheld capacitor discharger designed for safely discharging high-voltage capacitors in hobby electronics restoration — tube amplifiers, vintage radios, CRT televisions, and consumer power supplies.
41 parts
Parts like it
8
1N5927B
DO-41-65℃~+200℃ 1 Independent 11.4V~12.6V 12V 1uA@9.1V 550Ω 6.5Ω DO-41 Zener Diodes ROHSonsemiZener Diodes
1SMA4742A
DO-214AC(SMA)Zener Diodeshongjiacheng1SMA4742A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 11.4V~12.6V 12V 1W 5uA 9Ω SMA(DO-214AC) Zener Diodes ROHSMDDZener Diodes1SMA5927A
DO-214AC(SMA)-55℃~+150℃ 1 Independent 1.5W 11.4V~12.6V 12V 1uA@1V 550Ω 6.5Ω ±5% DO-214AC(SMA) Zener Diodes ROHShongjiachengZener DiodesSMAZ12
SMA-65℃~+150℃ 1 Independent 11.4V~12.6V 12V 150Ω 1W 1uA@9.1V 7Ω SMA Zener Diodes ROHSDiodes IncorporatedZener Diodes
1N4742ATR
DO-41-65℃~+200℃ 1 Independent 11.4V~12.6V 12V 1W 5uA@9.1V 700Ω 9Ω DO-41 Zener Diodes ROHSonsemiZener Diodes
ZM4742A
LL-411 Independent 10.8V~13.2V 12V 1W 5uA@9.1V 700Ω 9Ω LL-41 Zener Diodes ROHSHXY MOSFETZener DiodesZM4742A
LL-411 Independent 12V 1W 5uA@9.1V 700Ω 9Ω ±5% LL-41 Zener Diodes ROHSSlkorZener Diodes
Questions
Is there a KiCad symbol and footprint for the BZX85C12?
Yes. The symbol is Device:D_Zener and the footprint ICs And Semiconductors THD:DO-41, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BZX85C12?
DO-41, with 2 pins. Its footprint is drawn on this page.
Where is the BZX85C12 datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the BZX85C12?
JLCPCB lists it as part C890279, with 2,988 in stock; the sellers' links on this page open their listings.
What can replace the BZX85C12?
Parts like it in the library: the 1N5927B by onsemi, the 1SMA4742A by hongjiacheng, the 1SMA4742A by MDD and the 1SMA5927A by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BZX85C12?
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.