Skip to the content
PCBKitNew board
DO-35

BZX79C10

onsemi

-65℃~+200℃ 1 Independent 10V 200nA@7V 20Ω 500mW 9.4V~10.6V DO-35 Zener Diodes ROHS

Extended
DatasheetJLCPCBLCSConsemi/BZX79C10
Category
Zener Diodes
Package
DO-35
Pins
5

Overview

The BZX79C10 is a zener Diode made by onsemi in a DO-35 package with 2 pins. -65℃~+200℃ 1 Independent 10V 200nA@7V 20Ω 500mW 9.4V~10.6V DO-35 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C895303). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_ZenerFrom KiCad's library

Footprint

The library has no footprint for this part yet.

Parameters

8
Diode Configuration
1 Independent
Impedance(Zzt)
20Ω
Operating Junction Temperature Range
-65℃~+200℃
Pd - Power Dissipation
500mW
Reverse Leakage Current (Ir)
200nA@7V
Tolerance
±5%
Zener Voltage(Nom)
10V
Zener Voltage(Range)
9.4V~10.6V

Order codes

1

Pinout

2
The pins of the BZX79C10
PinNameType
1KPassive
2APassive

Open-source boards using it

All 6
  • 2 layers329.9 × 146.6 mmBabyHuey, the printed circuit board in 3D

    BabyHuey

    tristancollins/HiFi-BabyHuey

    An "Engineer's" Baby Huey EL34 PCB

    201 parts5
  • 4 layers151.1 × 71.1 mmMakeItRain, the printed circuit board in 3D

    MakeItRain

    TJLTM/MakeItRain

    DIY ESP-32 Based sprinkler Controller

    76 parts3
  • 2 layers72.9 × 71.1 mmAMS - CANBus - RGB - Nchannel, the printed circuit board in 3D

    AMS - CANBus - RGB - Nchannel

    TJLTM/Automotive-Monitoring-System-CANBus-Sensor

    What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…

    59 parts
  • 4 layers193.7 × 142.2 mmCampKeen, the printed circuit board in 3D

    CampKeen

    TJLTM/CampKeen

    What this can monitor: 1. Holding Tanks - Grey/Sewage via galvanic sensors (posts in the tank) these are the ones i'm using (https://www.amazon.com/gp/product/B07YVK2V2K/ref=ppxyodtbsearchasintitle?ie=UTF8&psc=1 and…

    326 parts
  • 2 layers72.9 × 71.1 mmAMS - CANBus Sensor - Voltage - 2 Out Daughter board, the printed circuit board in 3D

    AMS - CANBus Sensor - Voltage - 2 Out Daughter board

    TJLTM/Automotive-Monitoring-System-CANBus-Sensor

    What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…

    15 parts

Questions

Is there a KiCad symbol and footprint for the BZX79C10?

Yes. The symbol is Device:D_Zener, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BZX79C10?

DO-35, with 2 pins.

Where is the BZX79C10 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the BZX79C10?

JLCPCB lists it as part C895303, with 0 in stock; the sellers' links on this page open their listings.

What can replace the BZX79C10?

Parts like it in the library: the BZT52C10 by MDD, the BZT52H-B10 by Nexperia, the MMSZ5240BT1G by onsemi and the MMSZ10 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BZX79C10?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8