Skip to the content
123

BSS123L

onsemiExtended

-55℃~+150℃ 1 N-channel 100V 170mA 21.5pF 2V 360mW 6Ω@10V SOT-23-3 MOSFETs ROHS

Part id
onsemi/BSS123L
Category
MOSFETs
Package
SOT-23-3
Pins
3
In stock
0 at JLCPCB (C890262)
Used on
4 open-source boards

Overview

The BSS123L is a MOSFET made by onsemi in a SOT-23-3 package with 3 pins. -55℃~+150℃ 1 N-channel 100V 170mA 21.5pF 2V 360mW 6Ω@10V SOT-23-3 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Transistor_FET:BSS123, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C890262). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

123
Transistor_FET:BSS123From KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

Pinout

3
The pins of the BSS123L
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

4
  • 2 layers27.4 × 58.7 mmLc29h mikrobus PCB, the printed circuit board in 3D

    Lc29h mikrobus PCB

    i2hm/micro_climate_station

    Open the KiCad project using KiCad 7 and above.

    48 parts3
  • 2 layers85 × 70 mmLogicBoard v1, the printed circuit board in 3D

    LogicBoard v1

    AlexLymbo/MPPT-ECE445

    ECE445 MPPT Project

    83 parts1
  • 6 layers65 × 56.5 mmRPi Hat, the printed circuit board in 3D

    RPi Hat

    tharinduudu/gLOWCOST-2v2-mppcInterface-

    Four-channel Raspberry Pi HAT for gLOWCOST scintillator/MPPC readout with programmable bias, thresholds, and FPGA hit processing.

    204 parts1
  • 2 layers38.2 × 45.5 mmConti activate plug, the printed circuit board in 3D

    Conti activate plug

    NerdyProjects/conti_bat_trigger

    Die Conti-Akkus aus dem Finger-Forum liegen immer noch rum, eine Platine muss her, damit es einfach wird.

    58 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BSS123L?

Yes. The symbol is Transistor_FET:BSS123 and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BSS123L?

SOT-23-3, with 3 pins. Its footprint is drawn on this page.

Where is the BSS123L datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the BSS123L?

JLCPCB lists it as part C890262, with 0 in stock; the sellers' links on this page open their listings.

What can replace the BSS123L?

Parts like it in the library: the AP5N10S by ALLPOWER, the NCE0103Y by NCE, the DMN24H3D5L by TECH PUBLIC and the PJM10H03NSC by PJSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BSS123L?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.