4 layers25 × 80 mm
BAS116L
onsemi
Switching Diode
- Part id
- onsemi/BAS116L
- Category
- Uncategorised
- Package
- SOT23-3
- Pins
- 3
- Used on
- 2 open-source boards
Overview
The BAS116L is an uncategorised made by onsemi in a SOT23-3 package with 3 pins. Switching Diode.
PCBKit's library has its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
Open-source boards using it
2- 6 layers31.1 × 10.9 mm
Emg afe module
Genabl/parasitic_monorepo
Second-board regression target for the volume-conductor pipeline.
39 partsMIT
Parts like it
8
JTD78L05CA
SOT-23-3LSOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJTDUncategorisedESD752DBZ
SOT-23-3UncategorisedTexas InstrumentsMG78L05AT3
SOT-23-3SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMegainUncategorisedMCP111-300E/TT
SOT-23-3-40℃~+125℃@(TA) 1 1.75uA 1V~5.5V 2.93V 90us Active Low Open-drain Voltage monitor SOT-23-3 Supervisor and Reset ICs ROHSMicrochip TechnologyUncategorisedTPL810F33-3TR
SOT-23-3-40℃~+125℃@(Tj) 1 180mA 200mV@(50mA) 24V 2uA 3.3V 70uVrms 73dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS3PEAKUncategorisedHT7136S
SOT-23-3SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAOTEUncategorisedHT7150S
SOT-23-3SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAOTEUncategorisedHT7330S
SOT-23-3SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAOTEUncategorised
Questions
Is there a KiCad symbol and footprint for the BAS116L?
Yes. the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BAS116L?
SOT23-3, with 3 pins. Its footprint is drawn on this page.
What can replace the BAS116L?
Parts like it in the library: the JTD78L05CA by JTD, the ESD752DBZ by Texas Instruments, the MG78L05AT3 by Megain and the MCP111-300E/TT by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BAS116L?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.