Skip to the content
12

R5J250

OhmiteExtended

250Ω 5W Wirewound Resistor ±260ppm/℃ ±5% - Through Hole Resistors

Part id
ohmite/R5J250
Category
Through Hole Resistors
Pins
2
In stock
0 at JLCPCB (C3496979)

Overview

The R5J250 is a through Hole Resistor made by Ohmite with 2 pins. 250Ω 5W Wirewound Resistor ±260ppm/℃ ±5% - Through Hole Resistors.

PCBKit's library has its KiCad symbol (Device:R, from KiCad's library) and its footprint (EasyEDA_Cloud:DIO-DT-TH_BD8.0-L6.0-P12.70-D1.2, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3496979).

Symbol

Device:RFrom KiCad's library

Footprint

12
EasyEDA_Cloud:DIO-DT-TH_BD8.0-L6.0-P12.70-D1.2From EasyEDA

Pinout

2
The pins of the R5J250
PinNameType
1—Passive
2—Passive

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the R5J250?

Yes. The symbol is Device:R and the footprint EasyEDA_Cloud:DIO-DT-TH_BD8.0-L6.0-P12.70-D1.2, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the R5J250 datasheet?

Ohmite publishes it: the Datasheet link on this page opens it.

Where can I order the R5J250?

JLCPCB lists it as part C3496979, with 0 in stock; the sellers' links on this page open their listings.

What can replace the R5J250?

Parts like it in the library: the EWWR0006J250RT9 by RESI, the EWWR0010J250RT9 by RESI, the WHE250FET by Ohmite and the WNE250FET by Ohmite. Check their datasheets: a part that fits the footprint may still differ in its ratings.