OC5120
OCXExtended
-20℃~+85℃ 1 1.5A 140kHz Buck Built-in ESOP-8 LED Drivers ROHS
- Part id
- ocx/OC5120
- Category
- LED Drivers
- Package
- ESOP-8
- Pins
- 9
- In stock
- 0 at JLCPCB (C842726)
Overview
The OC5120 is a LED Driver made by OCX in a ESOP-8 package with 9 pins. -20℃~+85℃ 1 1.5A 140kHz Buck Built-in ESOP-8 LED Drivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OC5128, from EasyEDA) and its footprint (EasyEDA_Cloud:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C842726).
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | GND | Unspecified |
| 2 | VDD | Unspecified |
| 3 | NC | Unspecified |
| 4 | SW | Unspecified |
| 5 | CS | Unspecified |
| 6 | MODE | Unspecified |
| 7 | NC | Unspecified |
| 8 | NC | Unspecified |
| 9 | EP | Unspecified |
Parts like it
8
OC5128
ESOP-8-20℃~+85℃ 1 1.8A 160kHz 8V~100V Buck Built-in Under Voltage Protection、Over-Temperature Protection (OTP) ESOP-8 LED Drivers ROHSOCXLED DriversOC5122
ESOP-8-20℃~+85℃ 1 140kHz 2A 8V~60V Analog Buck Built-in ESOP-8 LED Drivers ROHSOCXLED DriversOC5122A
ESOP-8-20℃~+85℃ 1 140kHz 2.3A 8V~60V Buck Built-in Over-Temperature Protection (OTP) ESOP-8 LED Drivers ROHSOCXLED DriversOC5010
ESOP-8-20℃~+85℃ 1 1MHz 2.5A 3% 5.5V~40V Buck Built-in DC-DC Over-Temperature Protection (OTP) PWM ESOP-8 LED Drivers ROHSOCXLED DriversOC5038
ESOP-8-20℃~+85℃ 1 1MHz 3.1V~80V Buck Built-in DC-DC Over-Temperature Protection (OTP) PWM ESOP-8 LED Drivers ROHSOCXLED DriversOC5028B
ESOP-8-20℃~+85℃ 1 1MHz 3.1V~100V Buck Built-in Over-Temperature Protection (OTP) PWM ESOP-8 LED Drivers ROHSOCXLED DriversOC5020B
ESOP-8-20℃~+85℃ 1 1MHz 3.1V~100V Buck Built-in Over-Temperature Protection (OTP) PWM ESOP-8 LED Drivers ROHSOCXLED DriversMT7281
ESOP-8-40℃~+105℃ 1 2.5V~30V 550kHz Analog、PWM Buck、Boost、Buck-Boost Built-in DC-DC Over Voltage Protection、Over-Temperature Protection (OTP) ESOP-8 LED Drivers ROHSMAXIC TechLED Drivers
Questions
Is there a KiCad symbol and footprint for the OC5120?
Yes. The symbol is EasyEDA_Cloud:OC5128 and the footprint EasyEDA_Cloud:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the OC5120?
ESOP-8, with 9 pins. Its footprint is drawn on this page.
Where is the OC5120 datasheet?
OCX publishes it: the Datasheet link on this page opens it.
Where can I order the OC5120?
JLCPCB lists it as part C842726, with 0 in stock; the sellers' links on this page open their listings.
What can replace the OC5120?
Parts like it in the library: the OC5128 by OCX, the OC5122 by OCX, the OC5122A by OCX and the OC5010 by OCX. Check their datasheets: a part that fits the footprint may still differ in its ratings.