Skip to the content
12345678910111213141516

SC18IS606PWJ

NXP SemiconductorsExtended

-40℃~+105℃ 1.71V~3.6V 4mA SPI TSSOP-16 Interface - Specialized ROHS

Part id
nxp/SC18IS606PWJ
Category
Interface, Specialized
Package
TSSOP-16
Pins
16
In stock
0 at JLCPCB (C5190384)
Used on
9 open-source boards

Overview

The SC18IS606PWJ is an interface, Specialized made by NXP Semiconductors in a TSSOP-16 package with 16 pins. -40℃~+105℃ 1.71V~3.6V 4mA SPI TSSOP-16 Interface - Specialized ROHS.

PCBKit's library has its KiCad symbol (Interface_Expansion:SC18IS606PW, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5190384). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

1SDA2SCL3INT4RESET5A26A17A08SS2/GPIO29SS0/GPIO010MOSI11SPICLK12VDD13VSS14MISO15VREFP16SS1/GPIO1
Interface_Expansion:SC18IS606PWFrom KiCad's library

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

Pinout

16
The pins of the SC18IS606PWJ
PinNameType
1SDAInput/output
2SCLInput
3INTOpen collector
4RESETInput
5A2Input
6A1Input
7A0Input
8SS2/GPIO2Input/output
9SS0/GPIO0Input/output
10MOSIOutput
11SPICLKOutput
12VDDPower in
13VSSPower in
14MISOInput
15VREFPInput
16SS1/GPIO1Input/output

Open-source boards using it

9See all 9
  • 6 layers95.9 × 90.2 mmCpb, the printed circuit board in 3D

    Cpb

    OakwoodEngineering/ObiWanKomputer

    The Obi Wan Komputer and Combined Payload Boards from the NyanSat project.

    251 parts10
  • 4 layers131 × 89.5 mmMecha pico mcb, the printed circuit board in 3D

    Mecha pico mcb

    wubneh/MCTR260-pico-firmware

    Raspberry Pi Pico W robot controller firmware for MCTR 260 Mechatronics Design. Dual-core BLE architecture with mecanum drive, stepper/DC motor support, and configurable motion profiles.

    85 parts1MIT
  • 2 layers66.5 × 44.5 mmSPI to I2C module, the printed circuit board in 3D

    SPI to I2C module

    AyushNafdey/I2C-to-SPI-Module-using-SC18IS606

    Compact 2-layer I2C-to-SPI module using the SC18IS606 bridge IC with onboard W25Q32JVSS SPI Flash support and external SPI slave interfacing.

    48 parts
  • 2 layers73 × 41 mmBadge, the printed circuit board in 3D

    Badge

    hackclub/reflow

    A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.

    68 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SC18IS606PWJ?

Yes. The symbol is Interface_Expansion:SC18IS606PW and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SC18IS606PWJ?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the SC18IS606PWJ datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the SC18IS606PWJ?

JLCPCB lists it as part C5190384, with 0 in stock; the sellers' links on this page open their listings.

What can replace the SC18IS606PWJ?

Parts like it in the library: the PCA9546APW by Texas Instruments, the PCA9546APW by NXP Semiconductors, the IP2721 by INJOINIC and the SC18IS602BIPW/S8HP by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SC18IS606PWJ?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.