NXP SemiconductorsExtended
-40℃~+85℃ 150ns 2 2-Wire Bus 2-Wire Bus 2.3V~3V、3V~5.5V Driver、Buffer Level shifting、Hot-swap protection MSOP-10 Signal Buffers, Repeaters, Splitters ROHS
The PCA9615DPZ is a signal Buffers, Repeaters, Splitter made by NXP Semiconductors in a MSOP-10 package with 10 pins. -40℃~+85℃ 150ns 2 2-Wire Bus 2-Wire Bus 2.3V~3V、3V~5.5V Driver、Buffer Level shifting、Hot-swap protection MSOP-10 Signal Buffers, Repeaters, Splitters ROHS.
PCBKit's library has its KiCad symbol (Interface:PCA9615DP, from KiCad's library) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3824272). 5 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | V_{DD(A)} | Power in |
| 2 | SDA | Input/output |
| 3 | EN | Input |
| 4 | SCL | Input/output |
| 5 | V_{SS} | Power in |
| 6 | DSCLM | Input/output |
| 7 | DSCLP | Input/output |
| 8 | DSDAP | Input/output |
| 9 | DSDAM | Input/output |
| 10 | V_{DD(B)} | Power in |
JohnNeville/SunSprout
An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.
PereiraO28/Differential-I2C-Endpoint-Board
Converts a standard I2C signal into a Differential I2C signal. This improves signal integrity over long distances while using the same hardware as I2C.
VEXU-GHOST/ghost_kicad
Welcome to UT IEEE RAS VEXU GHOST's repository for our PCB developments! - PCB Images - Onboarding
robotique-udes/Exo_Electric
This repo contains all the information about the PCB and electrical schematics of Biogenius.
JohnNeville/SunSprout
An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.
Yes. The symbol is Interface:PCA9615DP and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
MSOP-10, with 10 pins. Its footprint is drawn on this page.
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3824272, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LTC4304IMS#PBF by Analog Devices, the LTC4302CMS-1#TRPBF by Analog Devices, the LTC4302CMS-1#PBF by Analog Devices and the LTC4302CMS-2#PBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.