2 layers60 × 60 mm
HighPower Mechaduino
pointhi/HighPower-Mechaduino
Mechaduino derivative which drives up to 10A, drawn using KiCad
140 parts31
LM75BD
NXP SemiconductorsExtended
-55℃~+125℃ 10ms 11bit 1uA 2.8V~5.5V I2C ±2℃ SOIC-8 Temperature Sensors ROHS
- Part id
- nxp/LM75BD
- Category
- Temperature Sensors
- Package
- SOIC-8
- Pins
- 8
- In stock
- 365 at JLCPCB (C34565)
- Used on
- 3 open-source boards
Overview
The LM75BD is a temperature Sensor made by NXP Semiconductors in a SOIC-8 package with 8 pins. -55℃~+125℃ 10ms 11bit 1uA 2.8V~5.5V I2C ±2℃ SOIC-8 Temperature Sensors ROHS.
PCBKit's library has its KiCad symbol (Sensor_Temperature:LM75B, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 365 are in stock at JLCPCB (part C34565). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
10- Supply, least
- 2.8 V · VCC, recommended operating min · p. 19
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 19
- Supply, absolute maximum
- 6 V · VCC, absolute max · p. 19
- Works from
- -55 °C · ambient temperature min · p. 19
- Works up to
- 125 °C · ambient temperature max · p. 19
- Junction, hottest
- 150 °C · junction temperature absolute max · p. 19
- Takes working
- 100 µA · typical average supply current, normal mode, I2C-bus inactive · p. 20
- Takes at most
- 300 µA · max average supply current, normal mode, I2C-bus active at 400 kHz · p. 20
- Takes asleep
- 200 nA · typical shutdown supply current · p. 20
- A pin gives at most
- 10 mA · OS output sink current absolute max · p. 19
What it is and has
7- ADC
- 11-bit, temperature resolution 0.125 °C · p. 2
- I2C-bus
- Up to 8 devices on the same bus · p. 1
- Temperature accuracy
- ±2 °C from −25 °C to +100 °C · p. 2
- Temperature accuracy
- ±3 °C from −55 °C to +125 °C · p. 2
- Thermal watchdog
- Programmable temperature threshold and hysteresis set points · p. 2
- Thermostat
- Stand-alone operation at power-up · p. 2
- Package
- SO8, 8 leads, body width 3.9 mm, SOT96-1 · p. 3
Around it
2- cap 0.1 μF
- between VCC and GND; Supply decoupling capacitor shown in the typical application; use at the VCC pin. · p. 16
- res 10 kΩ
- between SCL and VCC; I2C-bus pull-up resistor in the typical application. · p. 16
Specifications
29| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| supply voltage VCC | min -0.3 · max 6 V | 19 | |
| input voltage VI | at input pins | min -0.3 · max 6 V | 19 |
| input current II | at input pins | min -5 · max 5 mA | 19 |
| output sink current IO(sink) | on pin OS | max 10 mA | 19 |
| output voltage VO | on pin OS | min -0.3 · max 6 V | 19 |
| storage temperature Tstg | min -65 · max 150 C | 19 | |
| junction temperature Tj | max 150 C | 19 | |
| supply voltage VCC | min 2.8 · max 5.5 V | 19 | |
| ambient temperature Tamb | min -55 · max 125 C | 19 | |
| temperature accuracy Tacc | VCC = 2.8 V to 5.5 V; Tamb = 25 C to +100 C | min -2 · max 2 C | 20 |
| temperature accuracy Tacc | VCC = 2.8 V to 5.5 V; Tamb = 55 C to +125 C | min -3 · max 3 C | 20 |
| temperature resolution Tres | 11-bit digital temp data; typical at VCC = 3.3 V and Tamb = 25 C | typ 0.125 C | 20 |
| temperature conversion time tconv(T) | normal mode; typical at VCC = 3.3 V and Tamb = 25 C | typ 10 ms | 20 |
| conversion period Tconv | normal mode; typical at VCC = 3.3 V and Tamb = 25 C | typ 100 ms | 20 |
| average supply current IDD(AV) | normal mode: I2C-bus inactive; VCC = 2.8 V to 5.5 V; Tamb = 55 C to +125 C; typical at VCC = 3.3 V and Tamb = 25 C | typ 100 · max 200 A | 20 |
| average supply current IDD(AV) | normal mode: I2C-bus active; fSCL = 400 kHz; VCC = 2.8 V to 5.5 V; Tamb = 55 C to +125 C | max 300 A | 20 |
| average supply current IDD(AV) | shutdown mode; VCC = 2.8 V to 5.5 V; Tamb = 55 C to +125 C; typical at VCC = 3.3 V and Tamb = 25 C | typ 0.2 · max 1 A | 20 |
| LOW-level input voltage VIL | digital pins; maximum = 0.3 VCC | min -0.3 V | 20 |
| hysteresis of input voltage VI(hys) | SCL and SDA pins; typical at VCC = 3.3 V and Tamb = 25 C | typ 300 mV | 20 |
| hysteresis of input voltage VI(hys) | A2, A1, A0 pins; typical at VCC = 3.3 V and Tamb = 25 C | typ 150 mV | 20 |
| HIGH-level input current IIH | digital pins; VI = VCC | min -1 · max 1 A | 20 |
| LOW-level input current IIL | digital pins; VI = 0 V | min -1 · max 1 A | 20 |
| LOW-level output voltage VOL | SDA and OS pins; IOL = 3 mA | max 0.4 V | 20 |
| LOW-level output voltage VOL | SDA and OS pins; IOL = 4 mA | max 0.8 V | 20 |
| output leakage current ILO | SDA and OS pins; VOH = VCC | max 10 A | 20 |
| number of faults Nfault | programmable; conversions in overtemperature-shutdown fault queue | min 1 · max 6 | 20 |
| overtemperature shutdown threshold temperature Tth(ots) | default value | typ 80 C | 20 |
| hysteresis temperature Thys | default value | typ 75 C | 20 |
| input capacitance Ci | digital pins; typical at VCC = 3.3 V and Tamb = 25 C | typ 20 pF | 20 |
Pins, by the datasheet
8- 1 SDA
- I2C-bus serial bidirectional data line; open-drain. · p. 5
- 2 SCL
- I2C-bus serial clock input. · p. 5
- 3 OS
- Overtemperature Shutdown output; open-drain. · p. 5
- 4 GND
- Connect to system ground. · p. 5
- 5 A2
- User-defined address bit 2. · p. 5
- 6 A1
- User-defined address bit 1. · p. 5
- 7 A0
- User-defined address bit 0. · p. 5
- 8 VCC
- Power supply. · p. 5
Ordering codes, by the datasheet
2- LM75BD,112
- SO8 · Standard marking, IC tube, DSC bulk pack; minimum order quantity 2000; ambient −55 °C to +125 °C. · p. 3
- LM75BD,118
- SO8 · 13-inch reel Q1/T1, standard mark SMD; minimum order quantity 2500; ambient −55 °C to +125 °C. · p. 3
Open-source boards using it
3- 4 layers144 × 127 mm
Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5
Parts like it
8
DS18B20Z
SOIC-8-55℃~+125℃ 12bit 2.5V~5.5V 750ms Single-bus ±0.4℃ SOIC-8 Temperature Sensors ROHSUMWTemperature SensorsLM75AIMX
SOIC-8-55℃~+125℃ 2.7V~5.5V 300ms 500uA 9bit I2C ±2℃ SOIC-8 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsLM75AD
SOIC-8-55℃~+125℃ 100ms 11bit 2.8V~5.5V I2C ±2℃ SOIC-8 Temperature Sensors ROHSNXP SemiconductorsTemperature SensorsLM75BD(UMW)
SOIC-8-55℃~+125℃ 10ms 11bit 2.8V~5.5V I2C ±3℃ SOIC-8 Temperature Sensors ROHSUMWTemperature SensorsLM35DMX
SOIC-80℃~+100℃ 4V~30V 80uA ±1.5℃ SOIC-8 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsTMP75AID
SOIC-8-40℃~+125℃ 1.4V~5.5V 100nA 12bit 220ms I2C ±0.5℃ SOIC-8 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsDS18B20Z(AT)
SOP-8SOP-8 Temperature Sensors ROHSAOTETemperature SensorsDS18B20Z-TUDI
SOP-8SOP-8 Temperature Sensors ROHSTudiTemperature Sensors
Questions
Is there a KiCad symbol and footprint for the LM75BD?
Yes. The symbol is Sensor_Temperature:LM75B and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM75BD?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the LM75BD datasheet?
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
Where can I order the LM75BD?
JLCPCB lists it as part C34565, with 365 in stock; the sellers' links on this page open their listings.
What can replace the LM75BD?
Parts like it in the library: the DS18B20Z by UMW, the LM75AIMX by Texas Instruments, the LM75AD by NXP Semiconductors and the LM75BD(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM75BD?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.