4 layers51.1 × 73.1 mm
R820T With LCMXO2
BellssGit/FPGA-SDR-FM-RADIO
FPGA based FM radio with traditional IF architecture and digital IQ demodulation
119 parts25Apache-2.0
BGA2869
NXP SemiconductorsExtended
-40℃~+85℃ 0Hz~2.2GHz 10dBm 18dB 21dB 23dBm 24mA 3.1dB 32.2dB 4.5V~5.5V Linearization design SOT-363 RF Amplifiers ROHS
- Part id
- nxp/BGA2869
- Category
- RF Amplifiers
- Package
- SOT-363
- Pins
- 6
- In stock
- 0 at JLCPCB (C515583)
- Used on
- 3 open-source boards
Overview
The BGA2869 is a RF Amplifier made by NXP Semiconductors in a SOT-363 package with 6 pins. -40℃~+85℃ 0Hz~2.2GHz 10dBm 18dB 21dB 23dBm 24mA 3.1dB 32.2dB 4.5V~5.5V Linearization design SOT-363 RF Amplifiers ROHS.
PCBKit's library has its KiCad symbol (RF_Amplifier:BGA2869, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C515583). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
Pinout
6| Pin | Name | Type |
|---|---|---|
| 1 | Vcc | Power in |
| 2 | G | Power in |
| 3 | — | Output |
| 4 | G | Passive |
| 5 | G | Passive |
| 6 | — | Input |
Open-source boards using it
3- 2 layers63.5 × 73.7 mm
H7RTX V2 old1
alberto-grl/H7RTX-V2-Schematics-PCB
Schematics and PCB for a three-band direct sampling SDR. Using the internal ADC of an MCU, TX power is about 5 W. USB powered. Firmware code: https://github.com/alberto-grl/750RTX
139 parts - 2 layers100 × 40 mm
PM9160 Mk3
SaabFAN/PM9160_Mk3_PrescalerBoard
This is a recreation of the PM9160 Prescaler-Board, used in the PM6654x Programmable Counters made by Philips back in the late 80s / early 90s. It divides incoming frequencies by 16.
87 parts
Parts like it
8
BGA2818
SOT-363-6RF AmplifiersNXP SemiconductorsBGA2817
SOT-363-40℃~+85℃ 0Hz~2.2GHz 20dB 20dB 20dBm 20mA 24.4dB 3.8dB 3V~3.6V 8dBm Linearization design SOT-363 RF Amplifiers ROHSNXP SemiconductorsRF AmplifiersPSA-8A+
SC-70-6-40℃~+85℃ 0Hz~4GHz 11.2dB 12.8dBm 18dB 20dB 26.1dBm 36mA 4.75V~5.25V 4.8dB SC-70-6 RF Amplifiers ROHSMini-CircuitsRF AmplifiersMAX2644EXT+T
SC-70-6-10dB -13dBm -15dB -40℃~+85℃ 17dB 2.4GHz~2.5GHz 2.7V~5.5V 2.7mA 2dB Low power mode、Bias control circuit SC-70-6 RF Amplifiers ROHSMaxim Integrated (Analog Devices)RF AmplifiersPSA-39+
SC-70-6-40℃~+85℃ 0Hz~6GHz 10.2dB 10.7dBm 23.3dBm 3.3dB 30dB 32mA 38dB 4.75V~5.25V SC-70-6 RF Amplifiers ROHSMini-CircuitsRF AmplifiersMAAL-009053-TR3000
SC-70-6(SOT-363)1.4dB 14dB 3V 800MHz~3GHz 80mA Bias control circuit SC-70-6(SOT-363) RF Amplifiers ROHSMACOMRF AmplifiersMAAL-010570-TR3000
SOT-3630.95dB 100MHz~3.5GHz 14.3dB 3V~5V 60mA Linearization design、Bias control circuit、Electrostatic protection SOT-363 Low Noise Amplifiers (LNA) - RF ROHSMACOMRF AmplifiersSMA3107-TL-E
SOT-363-6-9.5dBm 0Hz~2.8GHz 2.7V~3.3V 24.5dB 3.6dB 6mA SOT-363-6 RF Amplifiers ROHSonsemiRF Amplifiers
Questions
Is there a KiCad symbol and footprint for the BGA2869?
Yes. The symbol is RF_Amplifier:BGA2869 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BGA2869?
SOT-363, with 6 pins. Its footprint is drawn on this page.
Where is the BGA2869 datasheet?
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
Where can I order the BGA2869?
JLCPCB lists it as part C515583, with 0 in stock; the sellers' links on this page open their listings.
What can replace the BGA2869?
Parts like it in the library: the BGA2818 by NXP Semiconductors, the BGA2817 by NXP Semiconductors, the PSA-8A+ by Mini-Circuits and the MAX2644EXT+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BGA2869?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.