Skip to the content
PCBKitNew board
BGA2803 on a board, in 3D

BGA2803

NXP Semiconductors

-4dBm 2.7V~3.3V 23.6dB 26dB 26dB 3dB 5.8mA 8dBm TSSOP-6-1.3mm RF Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCnxp/BGA2803
Category
RF Amplifiers
Package
TSSOP-6-1.3mm
Pins
6

Overview

The BGA2803 is a RF Amplifier made by NXP Semiconductors in a TSSOP-6-1.3mm package with 6 pins. -4dBm 2.7V~3.3V 23.6dB 26dB 26dB 3dB 5.8mA 8dBm TSSOP-6-1.3mm RF Amplifiers ROHS.

PCBKit's library has its KiCad symbol (RF_Amplifier:BGA2803, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2654175). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

Vcc1G236
RF_Amplifier:BGA2803From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-363_SC-70-6From KiCad's library

Parameters

8
Current - Supply
5.8mA
Gain
23.6dB
IP3
8dBm
Input return loss
26dB
Noise Figure
3dB
Output return loss
26dB
P1dB
-4dBm
Voltage - Supply
2.7V~3.3V

Order codes

1

Pinout

6
The pins of the BGA2803
PinNameType
1VccPower in
2GPower in
3—Output
4GPassive
5GPassive
6—Input

Open-source boards using it

All 5
  • 4 layers100 × 100 mmSDR board, the printed circuit board in 3D

    SDR board

    BillyWoods/Narrowband-SDR

    A four-channel narrowband SDR receiver based around the Mirics MSi001, MAX11131 and FX2LP.

    467 parts16
  • 4 layers54.3 × 76.1 mmPhase interferometer, the printed circuit board in 3D

    Phase interferometer

    mpkendall/phase-interferometer

    A 2(or more)-element phase interferometric direction finder for 433 MHz using a passive phased array

    78 parts3
  • 2 layers75.8 × 69.2 mmTrans, the printed circuit board in 3D

    Trans

    krishukmr/fmcw-sfcw-radar-transceiver

    A modular, low-cost Stepped-Frequency Continuous-Wave (SFCW) radar transceiver designed for subsurface geophysical sensing[cite: 4].

    33 parts
  • 4 layers33.5 × 12 mmSc ampl, the printed circuit board in 3D

    Sc ampl

    limpkin/side_channel_amplifier

    Repository containing the side channel amplifier boards presented at hardwear.io

    28 parts3MIT
  • 4 layers37.5 × 15.5 mmSc ampl, the printed circuit board in 3D

    Sc ampl

    limpkin/side_channel_amplifier

    Repository containing the side channel amplifier boards presented at hardwear.io

    35 parts3MIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/nxp/BGA2803" title="BGA2803 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/nxp/BGA2803.jpg" alt="BGA2803" width="1200" height="900">
A picture that opens the part, for a README
[![BGA2803](https://pcbkit.io/embed/parts/nxp/BGA2803.jpg?size=s)](https://pcbkit.io/parts/nxp/BGA2803)

Questions

Is there a KiCad symbol and footprint for the BGA2803?

Yes. The symbol is RF_Amplifier:BGA2803 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BGA2803?

TSSOP-6-1.3mm, with 6 pins. Its footprint is drawn on this page.

Where is the BGA2803 datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the BGA2803?

JLCPCB lists it as part C2654175, with 0 in stock; the sellers' links on this page open their listings.

What can replace the BGA2803?

Parts like it in the library: the BGA2867 by NXP Semiconductors, the BGA2815 by NXP Semiconductors, the BGA2851 by NXP Semiconductors and the BGA2874 by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BGA2803?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

5