Skip to the content
PCBKitNew board
插件,D3.5xL9.5mm

HW511

NTE Electronics

-55℃~+155℃ 1.1MΩ 500mW Metal Oxide Film Resistor ±2% ±200ppm/℃ 插件,D3.5xL9.5mm Through Hole Resistors

Extended
DatasheetJLCPCBLCSCnte-electronics/HW511
Category
Through Hole Resistors
Package
插件,D3.5xL9.5mm
Pins
5

Overview

The HW511 is a through Hole Resistor made by NTE Electronics in a 插件,D3.5xL9.5mm package with 2 pins. -55℃~+155℃ 1.1MΩ 500mW Metal Oxide Film Resistor ±2% ±200ppm/℃ 插件,D3.5xL9.5mm Through Hole Resistors.

PCBKit's library has its KiCad symbol (Device:R, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C6967949).

Symbol

Device:RFrom KiCad's library

Footprint

The library has no footprint for this part yet.

Parameters

6
Operating Temperature
-55℃~+155℃
Power(Watts)
500mW
Resistance
1.1MΩ
Temperature Coefficient
±200ppm/℃
Tolerance
±2%
Type
Metal Oxide Film Resistor

Order codes

1

Pinout

2
The pins of the HW511
PinNameType
1—Passive
2—Passive

Questions

Is there a KiCad symbol and footprint for the HW511?

Yes. The symbol is Device:R, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HW511?

插件,D3.5xL9.5mm, with 2 pins.

Where is the HW511 datasheet?

NTE Electronics publishes it: the Datasheet link on this page opens it.

Where can I order the HW511?

JLCPCB lists it as part C6967949, with 0 in stock; the sellers' links on this page open their listings.

What can replace the HW511?

Parts like it in the library: the MFR50SFTE52-1M1 by YAGEO, the MFR100FRE52-1M1 by YAGEO, the HHV2WSFT-73-1M1 by YAGEO and the MFR200FRE52-1M1 by YAGEO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Parts like it

8