Skip to the content
PCBKitNew board
插件,D3.5xL9mm

HW1D1

NTE Electronics

-55℃~+155℃ 1.1Ω 500mW Metal Oxide Film Resistor ±100ppm/℃ ±2% 插件,D3.5xL9mm Through Hole Resistors ROHS

Extended
DatasheetJLCPCBLCSCnte-electronics/HW1D1
Category
Through Hole Resistors
Package
插件,D3.5xL9mm
Pins
5

Overview

The HW1D1 is a through Hole Resistor made by NTE Electronics in a 插件,D3.5xL9mm package with 2 pins. -55℃~+155℃ 1.1Ω 500mW Metal Oxide Film Resistor ±100ppm/℃ ±2% 插件,D3.5xL9mm Through Hole Resistors ROHS.

PCBKit's library has its KiCad symbol (Device:R, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C6576979).

Symbol

Device:RFrom KiCad's library

Footprint

The library has no footprint for this part yet.

Parameters

6
Operating Temperature
-55℃~+155℃
Power(Watts)
500mW
Resistance
1.1Ω
Temperature Coefficient
±100ppm/℃
Tolerance
±2%
Type
Metal Oxide Film Resistor

Order codes

1

Pinout

2
The pins of the HW1D1
PinNameType
1—Passive
2—Passive

Questions

Is there a KiCad symbol and footprint for the HW1D1?

Yes. The symbol is Device:R, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HW1D1?

插件,D3.5xL9mm, with 2 pins.

Where is the HW1D1 datasheet?

NTE Electronics publishes it: the Datasheet link on this page opens it.

Where can I order the HW1D1?

JLCPCB lists it as part C6576979, with 0 in stock; the sellers' links on this page open their listings.

What can replace the HW1D1?

Parts like it in the library: the KNP100FT-52-1R1 by YAGEO, the 83F1R1 by Ohmite, the FMF200FRF73-1R1 by YAGEO and the FMP300FRF73-1R1 by YAGEO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Parts like it

8