MB24F
NHExtended
- Part id
- nh/MB24F
- Category
- Bridge Rectifiers
- Package
- MBF
- Pins
- 4
- In stock
- 5,030 at JLCPCB (C7427849)
Overview
The MB24F is a bridge Rectifier made by NH in a MBF package with 4 pins.
PCBKit's library has its footprint (EasyEDA_Cloud:MBF-SMD_L4.7-W3.8-P2.50-LS6.8-BL, from EasyEDA), ready for a KiCad board. 5,030 are in stock at JLCPCB (part C7427849).
Symbol
The library has no symbol for this part yet.
Footprint
From the datasheet
5- Reverse voltage, most
- 40 V · maximum repetitive peak reverse voltage · p. 1
- Forward current, most
- 2 A · maximum average rectified current at TC=100°C · p. 1
- Forward voltage
- 500 mV · typical per diode at IF=2.0 A, Ta=25℃ · p. 1
- Junction, hottest
- 150 °C · maximum operating junction temperature · p. 1
- Junction to air (MBF)
- 75 K/W · typical junction-to-ambient thermal resistance, Note 2 mounting · p. 1
What it is and has
3- Rectifier technology
- Schottky chip · p. 1
- Switching
- High Speed Switching · p. 1
- Package
- MBF · p. 1
Specifications
14| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage VRRM | 25℃ ambient temperature; MB24F | max 40 V | 1 |
| Maximum RMS Voltag VRMS | 25℃ ambient temperature; MB24F | max 28 V | 1 |
| Maximum DC Blocking Voltage VDC | 25℃ ambient temperature; MB24F | max 40 V | 1 |
| Maximum Average Forward Rectified Current IF(AV) | TC=100°C (see fig.1); MB24F | max 2 A | 1 |
| Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed On Rate Load (JEDEC Method) IFSM | 25℃ ambient temperature; MB24F | max 50 A | 1 |
| Current Squared Time Per Diode(t<8.3ms) I2t | 25℃ ambient temperature; MB24F | max 10.38 A2sec | 1 |
| Maximum Forward Voltage Per Diode (Note 1) V FM | Ta=25℃, IF=2.0 A; MB24F; pulse test: 300 us pulse width,1% duty cycle | typ 0.5 · max 0.53 V | 1 |
| Maximum DC Reverse Current at Rated DC Blocking Voltage (Note 1) I RRM | Ta=25℃, VR=40 V; MB24F; pulse test: 300 us pulse width,1% duty cycle | max 50 uA | 1 |
| Maximum DC Reverse Current at Rated DC Blocking Voltage (Note 1) I RRM | Ta=125℃, VR=40 V; MB24F; pulse test: 300 us pulse width,1% duty cycle | max 10 mA | 1 |
| Typical Junction Capacitance Per Diode CJ | 4V,1MHz; 25℃ ambient temperature; MB24F | typ 220 pF | 1 |
| Operating Junction Temperature Range TJ | MB24F | min -55 · max 150 ℃ | 1 |
| Storage Temperature Range TSTD | MB24F | min -55 · max 150 ℃ | 1 |
| Typical thermal resistance (Note 2) R θJA | MB24F, MBF; mounted on glass epoxy PC board with 4×1.5"×1.5"（3.81×3.81 cm）copper pad | typ 75 ℃/W | 1 |
| Typical thermal resistance (Note 2) R θJL | MB24F, MBF; mounted on glass epoxy PC board with 4×1.5"×1.5"（3.81×3.81 cm）copper pad | typ 20 ℃/W | 1 |
Pins, by the datasheet
4- 1 Output Cathode(-)
- Negative output, labeled Output Cathode(-). · p. 1
- 2 Output Anode(+)
- Positive output, labeled Output Anode(+). · p. 1
- 3 Input Pin(~)
- AC input. · p. 1
- 4 Input Pin(~)
- AC input. · p. 1
Parts like it
2
Questions
Is there a KiCad symbol and footprint for the MB24F?
Yes. the footprint EasyEDA_Cloud:MBF-SMD_L4.7-W3.8-P2.50-LS6.8-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MB24F?
MBF, with 4 pins. Its footprint is drawn on this page.
Where is the MB24F datasheet?
NH publishes it: the Datasheet link on this page opens it.
Where can I order the MB24F?
JLCPCB lists it as part C7427849, with 5,030 in stock; the sellers' links on this page open their listings.
What can replace the MB24F?
Parts like it in the library: the KMB24F by FUXINSEMI and the MB320F by YFW. Check their datasheets: a part that fits the footprint may still differ in its ratings.