Skip to the content
1234567891011121314

74LVC125APW

NexperiaExtended

-40℃~+125℃ 1 1.2V~3.6V 2.5ns@3.3V,50pF 24mA 24mA 4 40uA 74LVC Schmitt trigger Tri-State Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
nexperia/74LVC125APW
Category
Buffer, Driver, Transceiver
Package
TSSOP-14
Pins
14
In stock
6,732 at JLCPCB (C6059)
Used on
5 open-source boards

Overview

The 74LVC125APW is a buffer, Driver, Transceiver made by Nexperia in a TSSOP-14 package with 14 pins. -40℃~+125℃ 1 1.2V~3.6V 2.5ns@3.3V,50pF 24mA 24mA 4 40uA 74LVC Schmitt trigger Tri-State Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xx:74LVC125, from KiCad's library) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 6,732 are in stock at JLCPCB (part C6059). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

123
74xx:74LVC125From KiCad's library

Footprint

1234567891011121314
Package_SO:TSSOP-14_4.4x5mm_P0.65mmFrom KiCad's library

From the datasheet

8
Supply, least
1.65 V · VCC, recommended operating min · p. 3
Supply, most
3.6 V · VCC, recommended operating max · p. 3
Supply, least
1.2 V · VCC, functional min · p. 3
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 3
Works from
-40 °C · ambient temperature min · p. 3
Works up to
125 °C · ambient temperature max · p. 3
Takes working
100 nA · VCC supply current typical, VCC = 3.6 V, inputs at rails, IO = 0 A · p. 4
A pin gives at most
50 mA · output source or sink current absolute max, VO = 0 V to VCC · p. 3

What it is and has

7
Buffers
4 non-inverting buffers/line drivers with 3-state outputs · p. 1
Input/output tolerance
5 V tolerant · p. 1
Logic interface
Direct interface with TTL levels · p. 1
ESD protection
HBM JESD22-A114F exceeds 2000 V · p. 1
ESD protection
MM JESD22-A115-B exceeds 200 V · p. 1
ESD protection
CDM JESD22-C101E exceeds 1000 V · p. 1
Package
TSSOP14, 14 leads, SOT402-1 · p. 1

Specifications

54
ParameterConditionsAs printedPage
supply voltage VCCmin -0.5 · max 6.5 V3
input clamping current IIKVI < 0 Vmin -50 mA3
input voltage VIMinimum may be exceeded if input current ratings are observedmin -0.5 · max 6.5 V3
output voltage VOoutput HIGH or LOW-statemin -0.5 V3
output voltage VOoutput 3-statemin -0.5 · max 6.5 V3
supply current ICCmax 100 mA3
ground current IGNDmin -100 mA3
total power dissipation PtotTamb = -40 °C to +125 °C; SOT402-1 (TSSOP14); derates linearly with 7.3 mW/K above 81 °Cmax 500 mW3
storage temperature Tstgmin -65 · max 150 °C3
supply voltage VCCmin 1.65 · max 3.6 V3
supply voltage VCCfunctionalmin 1.2 V3
input voltage VImin 0 · max 5.5 V3
output voltage VOoutput HIGH or LOW statemin 0 V3
output voltage VOoutput 3-statemin 0 · max 5.5 V3
ambient temperature Tambmin -40 · max 125 °C3
input transition rise and fall rate Δt/ΔVVCC = 2.3 V to 2.7 Vmin 0 · max 20 ns/V3
input transition rise and fall rate Δt/ΔVVCC = 2.7 V to 3.6 Vmin 0 · max 10 ns/V3
HIGH-level input voltage VIHVCC = 1.2 V; -40 °C to +85 °Cmin 1.08 V4
HIGH-level input voltage VIHVCC = 1.2 V; -40 °C to +125 °Cmin 1.08 V4
HIGH-level input voltage VIHVCC = 2.3 V to 2.7 V; -40 °C to +85 °Cmin 1.7 V4
HIGH-level input voltage VIHVCC = 2.3 V to 2.7 V; -40 °C to +125 °Cmin 1.7 V4
HIGH-level input voltage VIHVCC = 2.7 V to 3.6 V; -40 °C to +85 °Cmin 2 V4
HIGH-level input voltage VIHVCC = 2.7 V to 3.6 V; -40 °C to +125 °Cmin 2 V4
LOW-level input voltage VILVCC = 1.2 V; -40 °C to +85 °Cmax 0.12 V4
LOW-level input voltage VILVCC = 1.2 V; -40 °C to +125 °Cmax 0.12 V4
LOW-level input voltage VILVCC = 2.3 V to 2.7 V; -40 °C to +85 °Cmax 0.7 V4
LOW-level input voltage VILVCC = 2.3 V to 2.7 V; -40 °C to +125 °Cmax 0.7 V4
LOW-level input voltage VILVCC = 2.7 V to 3.6 V; -40 °C to +85 °Cmax 0.8 V4
LOW-level input voltage VILVCC = 2.7 V to 3.6 V; -40 °C to +125 °Cmax 0.8 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -4 mA; VCC = 1.65 V; -40 °C to +85 °Cmin 1.2 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -4 mA; VCC = 1.65 V; -40 °C to +125 °Cmin 1.05 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -8 mA; VCC = 2.3 V; -40 °C to +85 °Cmin 1.8 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -8 mA; VCC = 2.3 V; -40 °C to +125 °Cmin 1.65 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -12 mA; VCC = 2.7 V; -40 °C to +85 °Cmin 2.2 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -12 mA; VCC = 2.7 V; -40 °C to +125 °Cmin 2.05 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -18 mA; VCC = 3.0 V; -40 °C to +85 °Cmin 2.4 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -18 mA; VCC = 3.0 V; -40 °C to +125 °Cmin 2.25 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -24 mA; VCC = 3.0 V; -40 °C to +85 °Cmin 2.2 V4
HIGH-level output voltage VOHVI = VIH or VIL; IO = -24 mA; VCC = 3.0 V; -40 °C to +125 °Cmin 2 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 100 uA; VCC = 1.65 V to 3.6 V; -40 °C to +85 °Cmax 0.2 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 100 uA; VCC = 1.65 V to 3.6 V; -40 °C to +125 °Cmax 0.3 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 4 mA; VCC = 1.65 V; -40 °C to +85 °Cmax 0.45 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 4 mA; VCC = 1.65 V; -40 °C to +125 °Cmax 0.65 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 8 mA; VCC = 2.3 V; -40 °C to +85 °Cmax 0.6 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 8 mA; VCC = 2.3 V; -40 °C to +125 °Cmax 0.8 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 12 mA; VCC = 2.7 V; -40 °C to +85 °Cmax 0.4 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 12 mA; VCC = 2.7 V; -40 °C to +125 °Cmax 0.6 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 24 mA; VCC = 3.0 V; -40 °C to +85 °Cmax 0.55 V4
LOW-level output voltage VOLVI = VIH or VIL; IO = 24 mA; VCC = 3.0 V; -40 °C to +125 °Cmax 0.8 V4
supply current ICCVCC = 3.6 V; VI = VCC or GND; IO = 0 A; -40 °C to +85 °C; typical at Tamb = 25 °Ctyp 0.1 · max 10 uA4
supply current ICCVCC = 3.6 V; VI = VCC or GND; IO = 0 A; -40 °C to +125 °Cmax 40 uA4
additional supply current ΔICCper input pin; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.7 V to 3.6 V; -40 °C to +85 °C; typical at VCC = 3.3 V and Tamb = 25 °Ctyp 5 · max 500 uA4
additional supply current ΔICCper input pin; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.7 V to 3.6 V; -40 °C to +125 °Cmax 5000 uA4
input capacitance CIVCC = 0 V to 3.6 V; VI = GND to VCC; typical at Tamb = 25 °Ctyp 4 pF4

Pins, by the datasheet

14
1 1OE
Data enable input, active LOW. · p. 2
2 1A
Data input. · p. 2
3 1Y
Data output. · p. 2
4 2OE
Data enable input, active LOW. · p. 2
5 2A
Data input. · p. 2
6 2Y
Data output. · p. 2
7 GND
Ground (0 V). · p. 2
8 3Y
Data output. · p. 2
9 3A
Data input. · p. 2
10 3OE
Data enable input, active LOW. · p. 2
11 4Y
Data output. · p. 2
12 4A
Data input. · p. 2
13 4OE
Data enable input, active LOW. · p. 2
14 VCC
Supply voltage. · p. 2

Ordering codes, by the datasheet

4
74LVC125AD
SO14 · SOT108-1; body width 3.9 mm; -40 °C to +125 °C · p. 1
74LVC125ADB
SSOP14 · SOT337-1; body width 5.3 mm; -40 °C to +125 °C · p. 1
74LVC125APW
TSSOP14 · SOT402-1; body width 4.4 mm; -40 °C to +125 °C · p. 1
74LVC125ABQ
DHVQFN14 · SOT762-1; 14 terminals; body 2.5 × 3 × 0.85 mm; -40 °C to +125 °C · p. 1

Open-source boards using it

5
  • 4 layers55 × 30 mmStitch candidate, the printed circuit board in 3D

    Stitch candidate

    EthanKahn08/example-pcb

    Design-stage RP2040 USB-C microSD reader: KiCad hardware, verification evidence, UART bring-up firmware, and assembly plan. Unbuilt and untested.

    68 parts
  • 2 layers60 × 56.8 mmAVR Standalone Programmer, the printed circuit board in 3D

    AVR Standalone Programmer

    RandBeyy/Standalone_AVR_Programmer

    A standalone, SD card based programmer for AVR microcontrollers. The device is built around an ATmega328P and programs a target without requiring a computer during normal use.

    45 parts
  • 2 layers81.3 × 55.9 mmL432KC, the printed circuit board in 3D

    L432KC

    grumat/glossy-msp430

    Glossy MSP430 - Embedded GDB Debugger for MSP430

    49 parts15GPL-2.0
  • 4 layers90 × 90 mmPCM1704, the printed circuit board in 3D

    PCM1704

    smileym4n-collab/Kicadprojects

    143 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74LVC125APW?

Yes. The symbol is 74xx:74LVC125 and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74LVC125APW?

TSSOP-14, with 14 pins. Its footprint is drawn on this page.

Where is the 74LVC125APW datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74LVC125APW?

JLCPCB lists it as part C6059, with 6,732 in stock; the sellers' links on this page open their listings.

What can replace the 74LVC125APW?

Parts like it in the library: the 74HC125PW by Nexperia, the MC74LCX06DT by onsemi, the 74AHCT126PW by Nexperia and the 74ALVC125PW by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74LVC125APW?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.