Skip to the content
12345678910111213141516

74HCT253D

NexperiaExtended

-40℃~+125℃ 17ns@5V,15pF、19ns@5V,15pF 4.5V~5.5V 6mA 6mA 74HCT 8uA Output enable high-impedance、Tri-state output SO-16 Signal Switches, Multiplexers, Decoders ROHS

Part id
nexperia/74HCT253D
Category
Signal Switches, Encoders & Decoders, Multiplexers
Package
SO-16
Pins
16
In stock
0 at JLCPCB (C547508)
Used on
2 open-source boards

Overview

The 74HCT253D is a signal Switches, Encoders & Decoders, Multiplexer made by Nexperia in a SO-16 package with 16 pins. -40℃~+125℃ 17ns@5V,15pF、19ns@5V,15pF 4.5V~5.5V 6mA 6mA 74HCT 8uA Output enable high-impedance、Tri-state output SO-16 Signal Switches, Multiplexers, Decoders ROHS.

PCBKit's library has its KiCad symbol (74xx:74LS253, from KiCad's library) and its footprint (Package_SO:SO-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C547508). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1OEa2A13I3a4I2a5I1a6I0a7Za8GND9Zb10I0b11I1b12I2b13I3b14A015OEb16VCC
74xx:74LS253From KiCad's library

Footprint

12345678910111213141516
Package_SO:SO-16_3.9x9.9mm_P1.27mmFrom KiCad's library

Pinout

16
The pins of the 74HCT253D
PinNameType
1OEaInput
2A1Input
3I3aInput
4I2aInput
5I1aInput
6I0aInput
7ZaTri-state
8GNDPower in
9ZbTri-state
10I0bInput
11I1bInput
12I2bInput
13I3bInput
14A0Input
15OEbInput
16VCCPower in

Open-source boards using it

2
  • 2 layers137 × 92 mmRAMEXPB V3, the printed circuit board in 3D

    RAMEXPB V3

    Builder68/OpenEarlyMacsRAMexpansion

    4 MB RAM upgrade for Macintosh 128K / 512K / 512Ke computers

    77 parts10CERN-OHL-S-2.0
  • 6 layers100 × 110 mmFujiNet NES Rev0, the printed circuit board in 3D

    FujiNet NES Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    118 parts142

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74HCT253D?

Yes. The symbol is 74xx:74LS253 and the footprint Package_SO:SO-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74HCT253D?

SO-16, with 16 pins. Its footprint is drawn on this page.

Where is the 74HCT253D datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74HCT253D?

JLCPCB lists it as part C547508, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 74HCT253D?

Parts like it in the library: the 74HC139D by Nexperia, the 74HC238D by Nexperia, the 74HC157D by Nexperia and the 74HC157D-Q100 by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74HCT253D?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.