MTS01P
MysentechExtended
-70℃~+150℃ 1.8V~5.5V 100nA 16bit 4ms、5.5ms、10.5ms I2C、Single-bus ±0.1℃ DFN-8(2.5x2.5) Temperature Sensors ROHS
- Part id
- mysentech/MTS01P
- Category
- Temperature Sensors
- Package
- DFN-8(2.5x2.5)
- Pins
- 9
- In stock
- 2,661 at JLCPCB (C3025192)
Overview
The MTS01P is a temperature Sensor made by Mysentech in a DFN-8(2.5x2.5) package with 9 pins. -70℃~+150℃ 1.8V~5.5V 100nA 16bit 4ms、5.5ms、10.5ms I2C、Single-bus ±0.1℃ DFN-8(2.5x2.5) Temperature Sensors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MTS01Z, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-8_L2.5-W2.5-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. 2,661 are in stock at JLCPCB (part C3025192).
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | SDA/DQ | Unspecified |
| 2 | ADDR | Unspecified |
| 3 | ALERT | Unspecified |
| 4 | SCL | Unspecified |
| 5 | VDD | Unspecified |
| 6 | nRESET | Unspecified |
| 7 | MODE | Unspecified |
| 8 | GND | Unspecified |
| 9 | NC | Unspecified |
Parts like it
4
MTS01Z
DFN-8(2.5x2.5)-70℃~+150℃ 1.8V~5.5V 100nA 16bit 4ms、5.5ms、10.5ms I2C、Single-bus ±0.1℃ DFN-8(2.5x2.5) Temperature Sensors ROHSMysentechTemperature SensorsMTS01W
DFN-8(2.5x2.5)-70℃~+150℃ 1.8V~5.5V 100nA 16bit 4ms、5.5ms、10.5ms I2C、Single-bus ±0.1℃ DFN-8(2.5x2.5) Temperature Sensors ROHSMysentechTemperature SensorsSTS30-DIS-2.5KS
DFN-8-EP(2.5x2.5)-40℃~+125℃ 15ms 2.4V~5.5V 2uA Factory temperature calibration、Temperature threshold monitoring、Low power standby I2C ±0.3℃ DFN-8-EP(2.5x2.5) Temperature Sensors ROHSSensirionTemperature SensorsTMP1826NGRR
WSON-8-EP(2.5x2.5)1.7V~5.5V 16bit 24uA 5.5ms Single bus Temperature threshold monitoring、Configurable temperature output、On-chip non-volatile parameter storage ±0.2℃ WSON-8-EP(2.5x2.5) Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
Questions
Is there a KiCad symbol and footprint for the MTS01P?
Yes. The symbol is EasyEDA_Cloud:MTS01Z and the footprint EasyEDA_Cloud:DFN-8_L2.5-W2.5-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MTS01P?
DFN-8(2.5x2.5), with 9 pins. Its footprint is drawn on this page.
Where is the MTS01P datasheet?
Mysentech publishes it: the Datasheet link on this page opens it.
Where can I order the MTS01P?
JLCPCB lists it as part C3025192, with 2,661 in stock; the sellers' links on this page open their listings.
What can replace the MTS01P?
Parts like it in the library: the MTS01Z by Mysentech, the MTS01W by Mysentech, the STS30-DIS-2.5KS by Sensirion and the TMP1826NGRR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.