Overview
The LBEE5PK2AE is an uncategorised made by Murata with 77 pins.
PCBKit's library has its KiCad symbol (WiFi_Bluetooth_LBEE5PK2AE:WiFi_Bluetooth_LBEE5PK2AE, from Antmicro) and its footprint (wifi-bluetooth-module-lbee5pk2ae:WiFi_Bluetooth_Module_LBEE5PK2AE, from Antmicro), ready for a KiCad board.
Symbol
Footprint
Pinout
77| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | SR_VLX | Power out |
| 3 | VBAT | Power in |
| 4 | WL_REG_EN | Input |
| 5 | LPO_IN | Input |
| 6 | BT_PCM_IN | Input |
| 7 | BT_PCM_CLK | Input/output |
| 8 | BT_PCM_SYNC | Input/output |
| 9 | BT_PCM_OUT | Output |
| 10 | BT_UART_TXD | Output |
| 11 | BT_UART_CTS_N | Input |
| 12 | BT_UART_RXD | Input |
| 13 | BT_UART_RTS_N | Output |
| 14 | GND | Passive |
| 15 | NC | Not connected |
| 16 | GND | Passive |
| 17 | BT_HOST_WAKE | Input/output |
| 18 | BT_GPIO_2 | Input/output |
| 19 | BT_GPIO_3 | Input/output |
| 20 | BT_GPIO_5 | Input/output |
| 21 | GND | Passive |
| 22 | WL_ANT | Input/output |
| 23 | GND | Passive |
| 24 | GND | Passive |
| 25 | RF_SW_CTRL_5 | Output |
| 26 | RF_SW_CTRL_0 | Output |
| 27 | GND | Passive |
| 28 | SDIO_CMD | Input/output |
| 29 | SDIO_DATA_1 | Input/output |
| 30 | SDIO_DATA_0 | Input/output |
| 31 | SDIO_DATA_3 | Input/output |
| 32 | SDIO_DATA_2 | Input/output |
| 33 | SDIO_CLK | Input |
| 34 | GND | Passive |
| 35 | NC | Not connected |
| 36 | NC | Not connected |
| 37 | NC | Not connected |
| 38 | NC | Not connected |
| 39 | NC | Not connected |
| 40 | NC | Not connected |
| 41 | GND | Passive |
| 42 | VDDIO | Power in |
| 43 | VIN_LDO | Power in |
| 44 | NC | Not connected |
| 45 | GPIO_1 | Input/output |
| 46 | USB2_DM | Input/output |
| 47 | USB2_DP | Input/output |
| 48 | USB2_MONCDR | Output |
| 49 | USB2_AVDD33 | Power in |
| 50 | USB2_RREF | Input/output |
| 51 | BT_DEV_WAKE | Input |
| 52 | WL_HOST_WAKE | Output |
| 53 | JTAG_SEL | Input |
| 54 | STRAP_1 | Input |
| 55 | STRAP_2 | Input |
| 56 | STRAP_0 | Input |
| 57 | GND | Passive |
| 58 | NC | Not connected |
| 59 | NC | Not connected |
| 60 | NC | Not connected |
| 61 | NC | Not connected |
| 62 | NC | Not connected |
| 63 | TRST_L | Input/output |
| 64 | JTAG_TDI | Input/output |
| 65 | JTAG_TDO | Input/output |
| 66 | JTAG_TCK/SWCLK | Input/output |
| 67 | JTAG_TMS/SWDIO | Input/output |
| 68 | BT_REG_EN | Input |
| 69 | GND | Passive |
| 70 | GND | Passive |
| 71 | GND | Passive |
| 72 | GND | Passive |
| 73 | GND | Passive |
| 74 | GND | Passive |
| 75 | GND | Passive |
| 76 | GND | Passive |
| 77 | GND | Passive |
Questions
Is there a KiCad symbol and footprint for the LBEE5PK2AE?
Yes. The symbol is WiFi_Bluetooth_LBEE5PK2AE:WiFi_Bluetooth_LBEE5PK2AE and the footprint wifi-bluetooth-module-lbee5pk2ae:WiFi_Bluetooth_Module_LBEE5PK2AE, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the LBEE5PK2AE datasheet?
Murata publishes it: the Datasheet link on this page opens it.