
Quickfeather board
antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
Multicomp Pro
The 2213S-16G is an uncategorised made by Multicomp Pro with 16 pins.
PCBKit's library has its KiCad symbol (PinHeader_2x8_P2.54mm_Drill1.1mm:PinHeader_2x8_P2.54mm_Drill1.1mm, from Antmicro) and its footprint (pinheader-2x8-p2-54mm-drill1-1mm:PinHeader_2x8_P2.54mm_Drill1.1mm, from Antmicro), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | — | Passive |
| 2 | — | Passive |
| 3 | — | Passive |
| 4 | — | Passive |
| 5 | — | Passive |
| 6 | — | Passive |
| 7 | — | Passive |
| 8 | — | Passive |
| 9 | — | Passive |
| 10 | — | Passive |
| 11 | — | Passive |
| 12 | — | Passive |
| 13 | — | Passive |
| 14 | — | Passive |
| 15 | — | Passive |
| 16 | — | Passive |

antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
Yes. The symbol is PinHeader_2x8_P2.54mm_Drill1.1mm:PinHeader_2x8_P2.54mm_Drill1.1mm and the footprint pinheader-2x8-p2-54mm-drill1-1mm:PinHeader_2x8_P2.54mm_Drill1.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
Multicomp Pro publishes it: the Datasheet link on this page opens it.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.