Skip to the content

MPM3804GG-Z

Monolithic Power SystemsExtended

-40℃~+125℃ 0.9mm 1 11uA 2.3V~5.5V 2.4MHz 2mm 2mm 600mA 600mV~5.5V 91% Buck Short Circuit Protection、Overheat protection QFN-10(2x2) DC-DC Power Modules ROHS

Part id
mps/MPM3804GG-Z
Category
DC DC Power Modules
Package
QFN-10(2x2)
Pins
6
In stock
1 at JLCPCB (C5799646)
Used on
3 open-source boards

Overview

The MPM3804GG-Z is a DC DC Power Module made by Monolithic Power Systems in a QFN-10(2x2) package with 6 pins. -40℃~+125℃ 0.9mm 1 11uA 2.3V~5.5V 2.4MHz 2mm 2mm 600mA 600mV~5.5V 91% Buck Short Circuit Protection、Overheat protection QFN-10(2x2) DC-DC Power Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MPM3804GG-Z, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-10_L2.0-W2.0_MPM3804GG, from EasyEDA), ready for a KiCad board. 1 are in stock at JLCPCB (part C5799646). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1VIN2SW5EN6OUT9PG10GND
EasyEDA_Cloud:MPM3804GG-ZFrom EasyEDA

Footprint

EasyEDA_Cloud:QFN-10_L2.0-W2.0_MPM3804GGFrom EasyEDA

From the datasheet

10
Supply, least
2.3 V · VIN, recommended operating, min · p. 3
Supply, most
5.5 V · VIN, recommended operating, max · p. 3
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 3
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 3
Takes working
11 µA · quiescent, VEN = 2 V, VIN = 3.6 V or 5 V, VFB = 0.63 V, TJ = 25°C, typical · p. 5
Current limit
1.3 A · P-FET peak current limit, typical · p. 4
Feedback reference
600 mV · VFB, VIN = 2.3–5.5 V, TJ = 25°C, typical · p. 4
Switches at
2.4 MHz · VOUT = 1.2 V, typical · p. 5
Junction to air (QFN-10 (2mmx2mm))
80 K/W · junction to ambient, JESD51-7 four-layer PCB · p. 3
Junction to case (QFN-10 (2mmx2mm))
16 K/W · junction to case, JESD51-7 four-layer PCB · p. 3

Open-source boards using it

3
  • 8 layers50 × 50 mmOmodri laas, the printed circuit board in 3D

    Omodri laas

    open-dynamic-robot-initiative/open-motor-driver-initiative

    Open-source drive for brushless motors, following the open dynamic robot initiative

    265 parts122BSD-3-Clause
  • 8 layers54.8 × 57.7 mmOmodri sa v2 laas, the printed circuit board in 3D

    Omodri sa v2 laas

    open-dynamic-robot-initiative/open-motor-driver-initiative

    Open-source drive for brushless motors, following the open dynamic robot initiative

    216 parts122BSD-3-Clause

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the MPM3804GG-Z?

Yes. The symbol is EasyEDA_Cloud:MPM3804GG-Z and the footprint EasyEDA_Cloud:QFN-10_L2.0-W2.0_MPM3804GG, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MPM3804GG-Z?

QFN-10(2x2), with 6 pins. Its footprint is drawn on this page.

Where is the MPM3804GG-Z datasheet?

Monolithic Power Systems publishes it: the Datasheet link on this page opens it.

Where can I order the MPM3804GG-Z?

JLCPCB lists it as part C5799646, with 1 in stock; the sellers' links on this page open their listings.

What can replace the MPM3804GG-Z?

Parts like it in the library: the MPM3811GG-Z by Monolithic Power Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MPM3804GG-Z?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.