
MP8904DD-LF-Z
Monolithic Power SystemsExtended
-40℃~+125℃@(Tj) 1 100uA 300mV@(500mA) 500mA 500mV~5V 6.5V Adjustable PG Pin、Over Current Protection、Over Temperature Protection、Enable Positive QFN-8(2x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- mps/MP8904DD-LF-Z
- Category
- Uncategorised
- Package
- QFN-8(2x3)
- Pins
- 9
- In stock
- 261 at JLCPCB (C134272)
- Used on
- 1 open-source board
Overview
The MP8904DD-LF-Z is an uncategorised made by Monolithic Power Systems in a QFN-8(2x3) package with 9 pins. -40℃~+125℃@(Tj) 1 100uA 300mV@(500mA) 500mA 500mV~5V 6.5V Adjustable PG Pin、Over Current Protection、Over Temperature Protection、Enable Positive QFN-8(2x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MP2002AGD-Z_C3751012, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-8_L3.0-W2.0-P0.50-BL-EP1.8, from EasyEDA), ready for a KiCad board. 261 are in stock at JLCPCB (part C134272). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | OUT | Unspecified |
| 2 | NC | Unspecified |
| 3 | PG | Unspecified |
| 4 | FB | Unspecified |
| 5 | EN | Unspecified |
| 6 | GND | Unspecified |
| 7 | NC | Unspecified |
| 8 | IN | Unspecified |
| 9 | EP | Unspecified |
Open-source boards using it
1- 10 layers197 × 130 mm

Questions
Is there a KiCad symbol and footprint for the MP8904DD-LF-Z?
Yes. The symbol is EasyEDA_Cloud:MP2002AGD-Z_C3751012 and the footprint EasyEDA_Cloud:DFN-8_L3.0-W2.0-P0.50-BL-EP1.8, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MP8904DD-LF-Z?
QFN-8(2x3), with 9 pins. Its footprint is drawn on this page.
Where is the MP8904DD-LF-Z datasheet?
Monolithic Power Systems publishes it: the Datasheet link on this page opens it.
Where can I order the MP8904DD-LF-Z?
JLCPCB lists it as part C134272, with 261 in stock; the sellers' links on this page open their listings.
Which open-source boards use the MP8904DD-LF-Z?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.