MP5016HGQH
Monolithic Power Systems
2.7-22V, 0.7 - 5A, Current Linit Switch with Over-Voltage Clamp and Reverse Block
- Part id
- mps/MP5016HGQH
- Category
- Uncategorised
- Package
- QFN10
- Pins
- 10
Overview
The MP5016HGQH is an uncategorised made by Monolithic Power Systems in a QFN10 package with 10 pins. 2.7-22V, 0.7 - 5A, Current Linit Switch with Over-Voltage Clamp and Reverse Block.
PCBKit's library has its KiCad symbol (Analog & Interface:MP5016HGQH, from CERN's library) and its footprint (ICs And Semiconductors SMD:MPS_MP5016HGQH, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | VCC | Power in |
| 2 | VCC | Power in |
| 3 | GND | Power in |
| 4 | ILIMIT | Passive |
| 5 | MODE | Input |
| 6 | SOURCE | Passive |
| 7 | SOURCE | Passive |
| 8 | GATE | Passive |
| 9 | EN | Input |
| 10 | DV/DT | Passive |
Questions
Is there a KiCad symbol and footprint for the MP5016HGQH?
Yes. The symbol is Analog & Interface:MP5016HGQH and the footprint ICs And Semiconductors SMD:MPS_MP5016HGQH, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MP5016HGQH?
QFN10, with 10 pins. Its footprint is drawn on this page.