MP2624GL-Z
Monolithic Power SystemsExtended
-40℃~+125℃ 1 3.9V~7V 4.2V 4.5A 65uA Charging IC I2C Support Support QFN-22(3x4) Battery Management ROHS
- Part id
- mps/MP2624GL-Z
- Category
- Battery Management
- Package
- QFN-22(3x4)
- Pins
- 22
- In stock
- 20 at JLCPCB (C6993008)
Overview
The MP2624GL-Z is a battery Management made by Monolithic Power Systems in a QFN-22(3x4) package with 22 pins. -40℃~+125℃ 1 3.9V~7V 4.2V 4.5A 65uA Charging IC I2C Support Support QFN-22(3x4) Battery Management ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MP2624GL-Z, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-22_L4.0-W3.0-P0.50-TL, from EasyEDA), ready for a KiCad board. 20 are in stock at JLCPCB (part C6993008).
Symbol
Footprint
From the datasheet
16- Supply, least
- 3.9 V · VIN, recommended operating, min · p. 7
- Supply, most
- 7 V · VIN, recommended operating, max · p. 7
- Supply, absolute maximum
- 20 V · IN, absolute maximum · p. 6
- Supply, least
- 2.5 V · VBATT_OTG, OTG battery operating range, min · p. 10
- Supply, most
- 4.5 V · VBATT_OTG, OTG battery operating range, max · p. 10
- Supply, absolute maximum
- 6 V · BATT, absolute maximum · p. 6
- Junction, hottest
- 150 °C · junction temperature, absolute maximum · p. 6
- Takes working
- 3 mA · VIN, input quiescent current, charge disabled, switching, SYS floating, typical · p. 7
- Takes asleep
- 65 µA · VIN = 5 V, DC/DC and battery FET disabled, max · p. 7
- Gives
- 4.5 A · ICHG, continuous charging output, max · p. 6
- Gives
- 4.5 A · ISYS, system output, max · p. 6
- A pin gives at most
- 10 mA · STAT or INT sink current, absolute maximum · p. 6
- Output
- 5.15 V · VIN_OTG, OTG boost output, IOTG = 0 A, typical · p. 10
- Switches at
- 1.7 MHz · buck charger, VBATT = 4.2 V, ICHG = 2 A, typical · p. 7
- Junction to air (QFN-22 (3mm x 4mm))
- 48 K/W · junction to ambient, JESD51-7 four-layer PCB · p. 6
- Junction to case (QFN-22 (3mm x 4mm))
- 11 K/W · junction to case, JESD51-7 four-layer PCB · p. 6
Questions
Is there a KiCad symbol and footprint for the MP2624GL-Z?
Yes. The symbol is EasyEDA_Cloud:MP2624GL-Z and the footprint EasyEDA_Cloud:QFN-22_L4.0-W3.0-P0.50-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MP2624GL-Z?
QFN-22(3x4), with 22 pins. Its footprint is drawn on this page.
Where is the MP2624GL-Z datasheet?
Monolithic Power Systems publishes it: the Datasheet link on this page opens it.
Where can I order the MP2624GL-Z?
JLCPCB lists it as part C6993008, with 20 in stock; the sellers' links on this page open their listings.