
OSSG v0p4
aezrapour/RINSIGHT
This version was an attempt to use a 2S battery pack. The main issue is that as of 2022-09-15, there are not many 2S battery charging IC's nor a nice i2C fuel gauge IC, so at the moment, this is a dead end design.
Monolithic Power SystemsExtended
-40℃~+85℃ 1.1mA 18V 1~2 2.1A 4.2V Charging IC Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、欠压锁定、Overcurrent Protection、Short-Circuit Protection、反向电流阻断 QFN-16(3x3) Battery Management ROHS
The MP2615CGQ-Z is a battery Management made by Monolithic Power Systems in a QFN-16(3x3) package with 16 pins. -40℃~+85℃ 1.1mA 18V 1~2 2.1A 4.2V Charging IC Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、欠压锁定、Overcurrent Protection、Short-Circuit Protection、反向电流阻断 QFN-16(3x3) Battery Management ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50_MP2615, from EasyEDA), ready for a KiCad board. 220 are in stock at JLCPCB (part C3682041). 1 open-source board in 1 repository on GitHub use it.
The library has no symbol for this part yet.

aezrapour/RINSIGHT
This version was an attempt to use a 2S battery pack. The main issue is that as of 2022-09-15, there are not many 2S battery charging IC's nor a nice i2C fuel gauge IC, so at the moment, this is a dead end design.
Yes. the footprint EasyEDA_Cloud:QFN-16_L3.0-W3.0-P0.50_MP2615, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-16(3x3), with 16 pins. Its footprint is drawn on this page.
Monolithic Power Systems publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3682041, with 220 in stock; the sellers' links on this page open their listings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.