Skip to the content

MP2322GQH-Z

Monolithic Power SystemsExtended

-40℃~+125℃@(TJ) 1 1.25MHz 1A 3V~22V 5uA 600mV~12V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Operating status indication、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes QFN-8(1.5x2) DC-DC Converters ROHS

Part id
mps/MP2322GQH-Z
Category
DC DC Converters
Package
QFN-8(1.5x2)
Pins
8
In stock
52 at JLCPCB (C3726283)
Used on
5 open-source boards

Overview

The MP2322GQH-Z is a DC DC Converter made by Monolithic Power Systems in a QFN-8(1.5x2) package with 8 pins. -40℃~+125℃@(TJ) 1 1.25MHz 1A 3V~22V 5uA 600mV~12V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Operating status indication、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes QFN-8(1.5x2) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MP2322GQH-Z, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-8_L2.0-W1.5-P0.50-BL, from EasyEDA), ready for a KiCad board. 52 are in stock at JLCPCB (part C3726283). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

1GND2IN3EN4VCC5FB6PG7BST8SW
EasyEDA_Cloud:MP2322GQH-ZFrom EasyEDA

Footprint

EasyEDA_Cloud:QFN-8_L2.0-W1.5-P0.50-BLFrom EasyEDA

Pinout

8
The pins of the MP2322GQH-Z
PinNameType
1GNDUnspecified
2INUnspecified
3ENUnspecified
4VCCUnspecified
5FBUnspecified
6PGUnspecified
7BSTUnspecified
8SWUnspecified

Open-source boards using it

5
  • 2 layers60 × 51.5 mmNanoEvery Replica, the printed circuit board in 3D

    NanoEvery Replica

    arhamrizwan2006/arduino-nano-every-pcb-replica

    Chip-level PCB replica of the Arduino Nano Every (ABX00028), designed in KiCad 10 — full schematic, routing, and manufacturing files

    23 parts
  • 4 layers24.6 × 33.1 mmPower supply2, the printed circuit board in 3D

    Power supply2

    jrseti/dishy1pi

    Satellite dish motor control for Raspberry Pi, hardware and software

    21 partsMIT
  • 4 layers56.6 × 39 mmMultimodal Actuator mk2, the printed circuit board in 3D

    Multimodal Actuator mk2

    TheUnknownAlias/betr_kicad_resources

    This repository contains shared KiCad symbols and footprints for our projects.

    91 parts
  • 4 layers24.6 × 33.1 mmPower supply2, the printed circuit board in 3D

    Power supply2

    jrseti/pcbs

    Various printed circuit board projects

    25 partsMIT

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the MP2322GQH-Z?

Yes. The symbol is EasyEDA_Cloud:MP2322GQH-Z and the footprint EasyEDA_Cloud:QFN-8_L2.0-W1.5-P0.50-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MP2322GQH-Z?

QFN-8(1.5x2), with 8 pins. Its footprint is drawn on this page.

Where is the MP2322GQH-Z datasheet?

Monolithic Power Systems publishes it: the Datasheet link on this page opens it.

Where can I order the MP2322GQH-Z?

JLCPCB lists it as part C3726283, with 52 in stock; the sellers' links on this page open their listings.

What can replace the MP2322GQH-Z?

Parts like it in the library: the MPQ2179GQHE-AEC1-Z by Monolithic Power Systems, the MP2162AGQH-Z by Monolithic Power Systems, the MPQ2178GQHE-AEC1-Z by Monolithic Power Systems and the MP2162AGQHT-Z by Monolithic Power Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MP2322GQH-Z?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.