HR1001AGS
Monolithic Power SystemsExtended
-40℃~+125℃ 1.56W 13V~15.5V 53% Half-Bridge Isolation Secondary-Side Feedback Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Overtemperature protection (OTP) SOIC-16 AC-DC Controllers and Regulators ROHS
- Part id
- mps/HR1001AGS
- Category
- Switching Controllers
- Package
- SOIC-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C193094)
Overview
The HR1001AGS is a switching Controller made by Monolithic Power Systems in a SOIC-16 package with 16 pins. -40℃~+125℃ 1.56W 13V~15.5V 53% Half-Bridge Isolation Secondary-Side Feedback Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Overtemperature protection (OTP) SOIC-16 AC-DC Controllers and Regulators ROHS.
PCBKit's library has its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C193094).
Symbol
The library has no symbol for this part yet.
Footprint
Parts like it
1Questions
Is there a KiCad symbol and footprint for the HR1001AGS?
Yes. the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the HR1001AGS?
SOIC-16, with 16 pins. Its footprint is drawn on this page.
Where is the HR1001AGS datasheet?
Monolithic Power Systems publishes it: the Datasheet link on this page opens it.
Where can I order the HR1001AGS?
JLCPCB lists it as part C193094, with 0 in stock; the sellers' links on this page open their listings.
What can replace the HR1001AGS?
Parts like it in the library: the HR1001BGS by Monolithic Power Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.