
Controller pcb
chevalierid/alan-setup
Materials for experimental setup examining the effects of artificial light at night on insects
MPDExtended
- Button And Strip Battery Connector ROHS
The BK-912-TR is a button And Strip Battery Connector made by MPD with 3 pins. - Button And Strip Battery Connector ROHS.
PCBKit's library has its KiCad symbol (Battery_Holder_BK-912:Battery_Holder_BK-912, from Antmicro) and its footprint (battery-holder-bk-912:Battery_Holder_BK-912, from Antmicro), ready for a KiCad board. JLCPCB lists it (part C6131859). 6 open-source boards in 5 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | Passive |
| S1 | V_BAT | Passive |
| S2 | V_BAT | Passive |

chevalierid/alan-setup
Materials for experimental setup examining the effects of artificial light at night on insects

fgervais/project-nrf-leak-detector_hardware
Install it and forget it: Detect leaks for over 20 years on a coin cell.




Yes. The symbol is Battery_Holder_BK-912:Battery_Holder_BK-912 and the footprint battery-holder-bk-912:Battery_Holder_BK-912, both drawn on this page. PCBKit places them on a board for you when you design with it.
MPD publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C6131859, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the BK-912 by MPD and the BK-912-G-TR by MPD. Check their datasheets: a part that fits the footprint may still differ in its ratings.
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.